Desk horizontal
Hi,
I'm building a desk by fixing a sheet of laminated MDF to a wall along a 2x2" strip that runs the length of the back and one side of the desk, with aluminium tube legs as support at the front. The floor of the room (1st floor, timber boards on joists, 100 years old, just hardboarded and shortly to be carpeted) has an incline of up to 2cms/metre along the direction of the length of the desk. The desk itself will be quite long (2.5m at the back and 2m at the front - it's a trapezoid shape a bit like this http://www.geom.uiuc.edu/education/c...n/gif/trap.gif). I'm just about to mount the 2x2" to the wall and was wondering whether horizontal with gravity or horizontal with the floor was best. On the one hand, horizontal with gravity will look better below the rows of shelves I've fixed to the wall above desk height, on the other I suspect that horizontal with the floor will be more comfortable to sit in front of - after all, my chair and I will be horizontal with the floor. Computer keyboards will be placed on the desk and so I feel having one side of my body lower than the other is not good posture. But horizontal with the floor will look pretty awful over 2.5 metres, just below a shelf of equal length mounted horizontal with gravity. Short of pulling up the floorboards and relevelling the floor (carpet fitters arrive on Tuesday), what would you do? Thanks. |
Desk horizontal
In an earlier contribution to this discussion,
JustMe wrote: Hi, I'm building a desk by fixing a sheet of laminated MDF to a wall along a 2x2" strip that runs the length of the back and one side of the desk, with aluminium tube legs as support at the front. The floor of the room (1st floor, timber boards on joists, 100 years old, just hardboarded and shortly to be carpeted) has an incline of up to 2cms/metre along the direction of the length of the desk. I'm just about to mount the 2x2" to the wall and was wondering whether horizontal with gravity or horizontal with the floor was best. There's only type of horizontal! *Parallel* with a sloping floor is *not* horizontal! Make it horizontal (with a spirit level) or it will look 'orrible - especially with shelves above it. If the sloping floor is a problem, make yourself a wedge-shaped platform for your chair to rest on. -- Cheers, Set Square ______ Please reply to newsgroup. Reply address is invalid. |
Desk horizontal
"JustMe" wrote in message ... Hi, I'm building a desk by fixing a sheet of laminated MDF to a wall along a 2x2" strip that runs the length of the back and one side of the desk, with aluminium tube legs as support at the front. The floor of the room (1st floor, timber boards on joists, 100 years old, just hardboarded and shortly to be carpeted) has an incline of up to 2cms/metre along the direction of the length of the desk. The desk itself will be quite long (2.5m at the back and 2m at the front - it's a trapezoid shape a bit like this http://www.geom.uiuc.edu/education/c...n/gif/trap.gif). I'm just about to mount the 2x2" to the wall and was wondering whether horizontal with gravity or horizontal with the floor was best. On the one hand, horizontal with gravity will look better below the rows of shelves I've fixed to the wall above desk height, on the other I suspect that horizontal with the floor will be more comfortable to sit in front of - after all, my chair and I will be horizontal with the floor. Computer keyboards will be placed on the desk and so I feel having one side of my body lower than the other is not good posture. But horizontal with the floor will look pretty awful over 2.5 metres, just below a shelf of equal length mounted horizontal with gravity. Short of pulling up the floorboards and relevelling the floor (carpet fitters arrive on Tuesday), what would you do? Thanks. Always put it up real horizontal, at least things won't roll off it. mrcheerful |
Desk horizontal
JustMe Wrote: Hi, I'm building a desk by fixing a sheet of laminated MDF to a wall along a 2x2" strip that runs the length of the back and one side of the desk, with aluminium tube legs as support at the front. The floor of the room (1st floor, timber boards on joists, 100 years old, just hardboarded and shortly to be carpeted) has an incline of up to 2cms/metre along the direction of the length of the desk. The desk itself will be quite long (2.5m at the back and 2m at the front - it's a trapezoid shape a bit like this http://www.geom.uiuc.edu/education/c...n/gif/trap.gif). I'm just about to mount the 2x2" to the wall and was wondering whether horizontal with gravity or horizontal with the floor was best. On the one hand, horizontal with gravity will look better below the rows of shelves I've fixed to the wall above desk height, on the other I suspect that horizontal with the floor will be more comfortable to sit in front of - after all, my chair and I will be horizontal with the floor. Computer keyboards will be placed on the desk and so I feel having one side of my body lower than the other is not good posture. But horizontal with the floor will look pretty awful over 2.5 metres, just below a shelf of equal length mounted horizontal with gravity. Short of pulling up the floorboards and relevelling the floor (carpet fitters arrive on Tuesday), what would you do? Thanks. Do you really want a desk thats completetly pi**ed ? No didn't think so, so fix it level of course. -- Nick H |
Desk horizontal
"Set Square" wrote Make it horizontal (with a spirit level) or it will look 'orrible - especially with shelves above it. If the sloping floor is a problem, make yourself a wedge-shaped platform for your chair to rest on. FWIW I agree, rolling pens etc would irritate me no end Regards Jeff |
Desk horizontal
JustMe wrote:
I'm just about to mount the 2x2" to the wall and was wondering whether horizontal with gravity or horizontal with the floor was best. Square, plumb & level - only option. 2cm per metre - you won't notice that whilst sitting at the table. Dave |
Desk horizontal
JustMe wrote:
Build the desk level (i.e. real - not parallel to the floor) and see what it is like to sit at. Short of pulling up the floorboards and relevelling the floor If it does not feel right, then you know what to do! (failing that a plinth for the chair). (carpet fitters arrive on Tuesday), what would you do? Get busy on Monday ;-) -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
All times are GMT +1. The time now is 10:27 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter