Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Filling (big) holes in wood/Wood repair
Had to rotate a couple of doors, and am now left with the holes (around
1.5cm in diameter) where the handles were. I also replaced/added some beadings, as most were removed years ago before the doors were covered in hardboard. There is also some damage that was caused when the beadings were removed that I wish to repair as best possible. I am looking for a filler to repair all these. Needs to be able to sand it, and then paint over once dry. I came across this http://www.screwfix.com/app/sfd/cat/...11363&ts=08014 which seem promising, but am not sure is can be sanded and painted. Has anybody had any experience with it? Any other suggestions? TIA. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Drilling holes Correcting mistakes in hole locations | Metalworking | |||
Filling 5/8 holes with stick | Metalworking | |||
Sheet Aluminum repair - Antique Radio chassis | Metalworking | |||
Accurate Holes in Concrete? (Slightly Bogus Metal Content) | Metalworking | |||
filling iregular holes | UK diy |