Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Replace singe breeze-block - mortar substitute?
Evenin' All.
I have to replace a single block at the top of a wall. I could buy a bag of cement and get a tiny bit out and mix it with a bit of sand and so on, but that would be a pain in the neck for such a small job, and it is hard to mix accurately such small quantities. And I would have to chop off the old mortar to make space for the new. Is there something in a plastic pot or tube that would cost very little, that would do the job? Let's call it "No More Mortar" and copyright the name, so the next one has to be called "Sod Mortar" and so on... BTW, the only load it will have to bear is a batton/noggin thingy for the edge of a plasterboard ceiling. Yours Without A Clue, D. Pearson |
#2
|
|||
|
|||
On Sun, 21 Aug 2005 17:33:28 +0000 (UTC), David Pearson wrote:
Is there something in a plastic pot PVA -- Nigel M |
#3
|
|||
|
|||
"Nigel Molesworth" wrote in message ... On Sun, 21 Aug 2005 17:33:28 +0000 (UTC), David Pearson wrote: Is there something in a plastic pot This sounds like good news - thanks Nigel. Now... do I... (a) coat both porous surfaces and join them together, or (b) seal surfaces first with diluted PVA, allow to dry, then do (a), .... or something else? Thanks, DP. BTW, is PVA the stuff that kids use at school? |
#4
|
|||
|
|||
"David Pearson" wrote in message ... "Nigel Molesworth" wrote in message ... On Sun, 21 Aug 2005 17:33:28 +0000 (UTC), David Pearson wrote: Is there something in a plastic pot This sounds like good news - thanks Nigel. Blimey, I deleted what Nigel had said! He suggested PVA. So... Now... do I... (a) coat both porous surfaces and join them together, or (b) seal surfaces first with diluted PVA, allow to dry, then do (a), ... or something else? Thanks, DP. BTW, is PVA the stuff that kids use at school? |
#5
|
|||
|
|||
On Tue, 23 Aug 2005 18:27:29 +0000 (UTC), David Pearson wrote:
(a) coat both porous surfaces and join them together, or (b) seal surfaces first with diluted PVA, allow to dry, then do (a), (b) is better, but (a) will do. You can buy PVA in 1 or 5 litre containers at most builders merchants. -- Nigel M |
#6
|
|||
|
|||
"Nigel Molesworth" wrote in message ... On Tue, 23 Aug 2005 18:27:29 +0000 (UTC), David Pearson wrote: (a) coat both porous surfaces and join them together, or (b) seal surfaces first with diluted PVA, allow to dry, then do (a), (b) is better, but (a) will do. You can buy PVA in 1 or 5 litre containers at most builders merchants. Thanks very much Nigel, and everyone else who replied. Looks like PVA is the way to go for this job, as the mortar is not smashed/crumbled, just split. I.e. there are no gaps, just surfaces to join together. Cheers, David P. |
#7
|
|||
|
|||
I could buy a bag of cement and get a tiny bit out and
mix it with a bit of sand and so on, but that would be a pain in the neck for such a small job, and it is hard to mix accurately such small quantities. And I would have to chop off the old mortar to make space for the new. You can buy bags of ready mixed bricklaying mortar (i.e. just add water). Still 25kg bags, but at least you don't have to measure it out, and they're pretty cheap. If you're lucky you might find a 10kg (or even 5kg) bag, but I'd be surprised. Christian. |
#8
|
|||
|
|||
In article ,
"Christian McArdle" writes: You can buy bags of ready mixed bricklaying mortar (i.e. just add water). Still 25kg bags, but at least you don't have to measure it out, and they're pretty cheap. If you're lucky you might find a 10kg (or even 5kg) bag, but I'd be surprised. My little local hardware store sells small bags. However, it's damp sand and a separate sealed sachet of cement inside, so you still have to mix it yourself. -- Andrew Gabriel |
#9
|
|||
|
|||
B&Q and Wickes both sell smallish bags of pre-mixed mortar, suitable
for small patching or repointing DIY jobs. Just add water. Bruce |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Major house renovation | Home Repair | |||
Rain seeping inside through concrete block wall above grade (Warning: LONG explanation) | Home Repair | |||
Breeze Block / Party Walls Questions | UK diy | |||
Making a damned mess of mortar!! | UK diy |