Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]()
In article ,
Andrew Gabriel wrote: Well I have been doing it religiously. Can't find either of my two packs of grommets though! Well, grommets are probably a requirement as Good Workmanship, unless you can achieve the same effect some other way. If the box is mounted on brick, etc, and made good with plaster, there ain't going to be any possibility of cable movement and therefore chafing. However, since they only cost a couple of pence when bought by the hundred, a sensible DIYer would use them as a matter of course. -- *Fax is stronger than fiction * Dave Plowman London SW To e-mail, change noise into sound. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Does polishing one or both surfaces reduce metal to metal friction? | Metalworking | |||
Earthing | UK diy | |||
Generator Grounding | UK diy | |||
Earthing | UK diy | |||
Ceiling fan earth | UK diy |