Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
installing Under Counter Oven
I am installing an under counter double oven. Is it acceptable to
earth the unit to the gas pipe? Can I earthe the gas hob to the gas pipe also? The nearest other potential earth point is the sink which is fedby plastic type pipes. Thanks Dave |
#2
|
|||
|
|||
"Dave" wrote in message
om... I am installing an under counter double oven. Is it acceptable to earth the unit to the gas pipe? As I understand it, you have to bond the gas pipe to the main earthing terminal in or near your Consumer Unit, using a seperate cable. Your oven should be connected to your consumer unit with three core cable, one of them being earth - does the oven have a plug on the end, or is it hard wired? Can I earth the gas hob to the gas pipe also? Is this hob plugged into a standard socket (for the ingiter)? if so, this should be providing all the earth it needs. |
#3
|
|||
|
|||
Dave wrote:
I am installing an under counter double oven. Is it acceptable to earth the unit to the gas pipe? Can I earthe the gas hob to the gas pipe also? The nearest other potential earth point is the sink which is fedby plastic type pipes. Assuming this isn't a troll - NO! The earthing of the double oven should be to the earth conductor (CPC) of the cable feeding it. No 'bonding' to other metalwork in the kitchen is required by the regulations. -- Chris Green |
#4
|
|||
|
|||
The cable feeding the oven space only has two wires ( no earth). hence
my concern about finding an alternative earth. THe gas hob needs to be wired up . Its in a new house, which i moved into last week. thanks dave |
#6
|
|||
|
|||
|
#7
|
|||
|
|||
I got the oven and gas hob installed. There was an integral earth
conductor as part of the supply to the oven space, which I didn't see straight off. Thanks a lot for your help Dave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Installing a hob but no oven | UK diy | |||
Help Installing GE Oven Ignitor | Home Repair | |||
Home made heat treating oven kiln: how to & Merry Xmas ! | Metalworking | |||
Need help with Whirlpool Gas Range - oven won't light | Home Repair | |||
advice require about wiring of fitted electric oven | UK diy |