 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Bypass valve position
What's this about having to fit a bypass valve to comply with building regs?
Can't I just leave one rad without TRVs or isn't that the same? Regardless I thought I would fit it at the 'manifold' end which is fed by a pair of 28mm pipes but is some way remote from the boiler. Is this a suitable position, or would it be better closer to the boiler itself? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Mid Position Valve query plus. | UK diy | |||
| Mid position valve question. | UK diy | |||
| Slightly tricky plumbing question | Home Ownership | |||
| Mid-Position 3 Port Valve - Hot Water (A) position & OFF - but HW flow to boiler? | UK diy | |||
| Mid Position Valve | UK diy | |||
Threaded Mode
