Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
CM67 NG Disable Optimum Start
Hi can any point me to a way to disable optimum start on a Honeywell
CM67? I know everyone rants and raves about how good these things are, but i just want to use it as a normal controller. Cheers John |
#2
|
|||
|
|||
In article , Johnt
wrote: Hi can any point me to a way to disable optimum start on a Honeywell CM67? Instructions available from http://content.honeywell.com/uk/homes/manuals.htm Optimum start on/off is the first installer set option -- Tony Bryer SDA UK 'Software to build on' http://www.sda.co.uk Free SEDBUK boiler database browser http://www.sda.co.uk/qsedbuk.htm [Latest version QSEDBUK 1.10 released 4 April 2005] |
#3
|
|||
|
|||
"johnt" wrote in message om... Hi can any point me to a way to disable optimum start on a Honeywell CM67? I know everyone rants and raves about how good these things are, but i just want to use it as a normal controller. Cheers John Move slider to OFF Press and hold I and press PROG 3 and 4 together.(display should read "spanner 1" and "1:CL" Press PROG 2 (display should read "spanner 2 and "3:Ot" Press "clock +" several times until display reads "15:Op" and "1" Press TEMP DOWN ARROW so display reads "15:Op" and flashing "0" Press I once. "0" is not flashing Move slider to Auto or Man. There are 2 or 3 variants of CM67. The T6667B1069 does not have optimisation. I think the user and installation manuals are available at http://europe.hbc.honeywell.com Keith G. Powell |
#4
|
|||
|
|||
Thanks for this - maybe i wasn't looking hard enough as i couldn't see it in
the manuals. Cheers John "Keith G. Powell" wrote in message ... "johnt" wrote in message om... Hi can any point me to a way to disable optimum start on a Honeywell CM67? I know everyone rants and raves about how good these things are, but i just want to use it as a normal controller. Cheers John Move slider to OFF Press and hold I and press PROG 3 and 4 together.(display should read "spanner 1" and "1:CL" Press PROG 2 (display should read "spanner 2 and "3:Ot" Press "clock +" several times until display reads "15:Op" and "1" Press TEMP DOWN ARROW so display reads "15:Op" and flashing "0" Press I once. "0" is not flashing Move slider to Auto or Man. There are 2 or 3 variants of CM67. The T6667B1069 does not have optimisation. I think the user and installation manuals are available at http://europe.hbc.honeywell.com Keith G. Powell |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Failing Fluorescent Fixtures | Home Repair | |||
CM67 Optimum Start algorithm | UK diy |