Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Thin walled stainless
Hi guys, I'm looking for some thin wall Stainless (304/316) tubing. 2" OD. (0.035 wall max.)
So McMaster-Carr has a nice selection. http://www.mcmaster.com/#catalog/120/150/=quiou3 and I found burnsstainless on the web. http://www.burnsstainless.com/304sstubing-11.aspx The only place I found that listed walls thinner than 0.035 was vitaneedle. http://www.vitaneedle.com/stainless-...less-tubes.htm I sent them a quote request. Just wondering if you know of other sources? Well I'm mostly interested in walls less than 0.035". (otherwise I'll just use McM-C) Thanks, George H. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Thin walled stainless
On Tuesday, February 25, 2014 10:46:43 AM UTC-5, Lloyd E. Sponenburgh wrote:
fired this volley in news:4ff0e594-68e7-4a4e-9aee- : ust wondering if you know of other sources? Well I'm mostly interested in wall George, I'll have to do some digging. About a year ago, we ordered some 1" o.d. x 0.020" wall material in 316. We got it from VitaNeedle. They have 2" in 0.020 walls. I remember it being DAMNED expensive. We bought two six-foot sticks, and I think it was more than $150. Lloyd Thanks Lloyd, I've got a quote request into vita needle. I'm prepared for sticker shock. George H. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Repairing hundreds of yards of black thin-walled half-inchirrigation tubing | Home Repair | |||
How to connect to thin walled 32mm P trap? | UK diy | |||
Notching thin-walled aluminum tubing... | Metalworking | |||
Where can I buy 5cm, thin walled, metal flue pipe for a Kelston boiler? | UK diy | |||
Bending a Thin walled extrusion | Metalworking |