Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
True up a three jaw?
Got one that seems to run 0.022" out. I turn a rod, indicate off it
and it's great, rotate it in the chuck 120 deg and then it indicates 22 thou out, turn it another 120 deg and the same story, another 120 and it's back spot on again. It's repeatable. Kicker is that with unturned stock chucked it it reads good. I'm confused |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Is it true | UK diy | |||
Is this true? | Home Repair | |||
Is This True? | Home Repair |