Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Help ID Caps-Sony CCD-TR33
so-as per my previous post:
The distinguishing feature of this otherwise unremarkable video 8 camera is it's color viewfinder. Mine was working fine last week. Took it out for the weekly power up I do with all my other video cameras, and the viewfinder is B/W, and washed out. All other functions are normal, and the video output to the TV is color. Is this prolly a cap issue? Has anyone any experience with disassembly and repair of Sony boards? Are they smt? Is it practical to consider a teardown of this device to attempt repair? JR I put the camera in the freezer overnight. in the morning, I removed it, attached the video cable and a powerpack. It turned on, with color viewfinder. Of course, the lenses fogged up almost immediately, so I turned it off and went to work. PM, turned it on, and it's back to B/W viewfinder. So, I tore it down, and here is a link to a page I made showing the main board. http://www.seanet.com/~jasonrnorth/sony.html The board is about 4" long and 3" high. I need help identifying these electrolytics. They are SMT, and I don't quite understand some of the marks. Also, help with sourcing these. I doubt RadioShack will work. Thanks a million in advance. The camera is quite complex; I hope I will remember how to reassemble it after a time... JR -- -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Help ID Caps-Sony CCD-TR33
On Mon, 12 May 2008 14:21:45 -0700, JR North
put finger to keyboard and composed: So, I tore it down, and here is a link to a page I made showing the main board. http://www.seanet.com/~jasonrnorth/sony.html I need help identifying these electrolytics. They are SMT, and I don't quite understand some of the marks. Y1 = 22uF 6Volts Z1P = 33uF 10V X = 10uF 16V & 2.2uF 35V Y2 = 33uF 4V 1Z50 = 1uF 50V 220/4s/4t0 could be 220uF 4V - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Help ID Caps-Sony CCD-TR33
Muchas grassyass. Found this while snooping for caps; it's a start...:
http://www.matelectronics.com/acatal...its_111. html JR Franc Zabkar wrote: On Mon, 12 May 2008 14:21:45 -0700, JR North put finger to keyboard and composed: So, I tore it down, and here is a link to a page I made showing the main board. http://www.seanet.com/~jasonrnorth/sony.html I need help identifying these electrolytics. They are SMT, and I don't quite understand some of the marks. Y1 = 22uF 6Volts Z1P = 33uF 10V X = 10uF 16V & 2.2uF 35V Y2 = 33uF 4V 1Z50 = 1uF 50V 220/4s/4t0 could be 220uF 4V - Franc Zabkar -- -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help ID Caps-Sony CCD-TR33 Board | Electronics Repair | |||
Sony CCD-TR33 Viewfinder issues | Electronics Repair | |||
Sony CCD-FX410 Camcorder Repair- Leaky Caps; which board is bad? | Electronics Repair |