Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
ASK videoprojector convergence
I got an old ASK Impression A8 videoprojector and it has bad
convergence-problem. Projector is lcd-equipment and as far as I understand, the convergence is arranged electronically. Anyway there is not any mechanical adjustment. I wonder if the projector has "service mode" like monitors or do I need a special program to adjust convergence? Thanks Matti |
#2
Posted to sci.electronics.repair
|
|||
|
|||
ASK videoprojector convergence
Matti wrote:
I got an old ASK Impression A8 videoprojector and it has bad convergence-problem. Projector is lcd-equipment and as far as I understand, the convergence is arranged electronically. Anyway there is not any mechanical adjustment. I wonder if the projector has "service mode" like monitors or do I need a special program to adjust convergence? I was under the impression that a lot of the convergence was done mechanically...aligning three separate lcd panels. jak Thanks Matti |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Auto convergence re-enable after adjusting convergence in Hitachi 65SWX20B. | Electronics Repair | |||
help for videoprojector lcp5000/10r philips | Electronics Repair | |||
Static convergence | Electronics Repair | |||
TV w/ Convergence Problem | Electronics Repair | |||
Sharp XV-C1E Videoprojector | Electronics Repair |