 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Shape for a pressure washer fan nozzle
I bought the cheapest HF pressure washer. The nozzle is a straight jet
(which is plenty powerful for what I need) and to get a fan spray you twist the end of the wand and two plates come together and pinch the stream into a fan. The fan spray seems disproportionately underpowered. I'd like to turn a fixed narrow nozzle for it in the hopes of preserving more power with a wider footprint. Any suggestions on what the shape should be? -- Ben Jackson http://www.ben.com/ |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Pressure Washer Brand Recommendations | Home Repair | |||
| trenching and other uses of a high pressure washer | Home Repair | |||
| Regulator pressure increases over time - why?? | Home Repair | |||
| Water Pump / Pressure Tank Problem !!!!!! | Home Repair | |||
| Water Pump / Pressure Tank Problem !!!!!! | Home Ownership | |||
Threaded Mode
