 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
DC motor control problem HELP !!!
I have a 40hp DC motor in a machine set up for spinning. The motor
control (probably built by one of the Apostles) has done something bad and I need to fix it. The system is Reliance and I'm guessing the control is the original in this OLD Given lathe. I haven't used programmable RPM control in the thing for years, I adjust the pot on the spindle control box itself, so I need to figure out some way to make it work. Ideas. JohnF |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
| Paslode IM250A Cordless Finish Nailer, Stripped Treads Problem | Woodworking | |||
| Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
| Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
| Sony G410R Monitor problem (and bad Sony support) | Electronics Repair | |||
Threaded Mode
