Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Inexpensive oven style thermostat?
As a thought...if you're looking for what I think you are you could use the fan sensor from your furnace. The older ones
allowed for adjustment for the on-off temperature point. R. Wink On 17 Feb 2005 16:10:56 GMT, Ignoramus21962 wrote: I am looking for an inexpensive oven style thermostat to make a meat smoker with settable temperature. Range of 150-300 degrees F would be fine. The thermostat would have to have a sensor inside an enclosure, and control an electric range style heating element. The lowest prices that I have seen is about $55 or so. Is there anything cheaper that I missed? Thanks. http://igor.chudov.com/tmp/ferrups-meat-smoker/ i |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inexpensive oven style thermostat? | Metalworking | |||
Inexpensive oven style thermostat? | Home Repair | |||
Inexpensive oven style thermostat? | Home Repair | |||
Inexpensive oven style thermostat? | Metalworking | |||
Gas oven thermostat replacement | Home Repair |