Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
there was some discussion a while back about motors and controllers for, if
I remember right, battlebots. I have tested and two rather nice LEESON 60 amp controllers - these would be good for that kind of application, as well as for servo or other motor control from battery power here's the link http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3873887854 -- Bill also check out http://www.wbnoble.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Toshiba high voltage problem | Electronics Repair | |||
Voltage Regulation | Electronics | |||
voltage regulator that drops out of circuit | Electronics | |||
low voltage dimmer question | Home Ownership | |||
IBM P-260 6552-63N (Sony CDP-G500?) G2 voltage problem, need service manual/help | Electronics Repair |