Bought a drill press today
 

Well I bought a Delta DP300 today. my wife works at ACE Hardware and they
have an ACE drill press on sale and their brown bag sale is coming up in a
few weeks. I was looking at that one being a 10" 1/4 motor but they pointed
out that they had a Delta 12' 1/3hp in the ware house for 179.99, so I did
some looking and saw that the tool crib has it for the same price but the
S/H was 60 dollars. I will pass at that. I had some points build up with
ACE that came to 50.00 so the DP only cost me 140.00 out the door.

Sorry I do not have the room for floor models.
Now I have to build a DP stand for it. Maybe I will put the DP and bench
grinder/ wire wheel on the same stand..

Don D.

Don D. wrote:

Well I bought a Delta DP300 today. my wife works at ACE Hardware and they
have an ACE drill press on sale and their brown bag sale is coming up in a
few weeks. I was looking at that one being a 10" 1/4 motor but they pointed
out that they had a Delta 12' 1/3hp in the ware house for 179.99, so I did
some looking and saw that the tool crib has it for the same price but the
S/H was 60 dollars. I will pass at that. I had some points build up with
ACE that came to 50.00 so the DP only cost me 140.00 out the door.

Sorry I do not have the room for floor models.
Now I have to build a DP stand for it. Maybe I will put the DP and bench
grinder/ wire wheel on the same stand..

You have room for a DP stand but not a floor model? GWE

The stand will be staying outside along the side of the garage were I do
most of the work, and the drill will have to come in at night so it does not
end up missing at night.



"Grant Erwin" wrote in message
...
Don D. wrote:

Well I bought a Delta DP300 today. my wife works at ACE Hardware and they
have an ACE drill press on sale and their brown bag sale is coming up in
a few weeks. I was looking at that one being a 10" 1/4 motor but they
pointed out that they had a Delta 12' 1/3hp in the ware house for 179.99,
so I did some looking and saw that the tool crib has it for the same
price but the S/H was 60 dollars. I will pass at that. I had some points
build up with ACE that came to 50.00 so the DP only cost me 140.00 out
the door.

Sorry I do not have the room for floor models.
Now I have to build a DP stand for it. Maybe I will put the DP and bench
grinder/ wire wheel on the same stand..

You have room for a DP stand but not a floor model? GWE