Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Source for mild steel strip?
I need about 20' of .75" wide 20 to 24 gauge mild steel. Anyone know where
I can get it without having to buy a few hundred pounds? -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Steel Choice? | Metalworking | |||
"homemade" tool steel | Metalworking | |||
Loft Conversion, Steel Trimmer end bearing support | UK diy | |||
looking for small steel square tubing source | Metalworking | |||
Bench Vise Questions (Steel vs. Iron) | Metalworking |