Compressed air heater
Hmm... Cooling of a piece of work you are drilling or machining in bizarro
world? grin Seriously though, what temperature (range?) does it produce? Regards, Joe Agro, Jr. (800) 871-5022 http://www.autodrill.com http://www.multi-spindle-heads.com V8013 "Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i |
Blow a lot of hot air out of its nozzle? There are a lot of guys on this
NG who don't need another one of those .. :-) Ignoramus13229 wrote: I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i |
"Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i Pastics welding of forming? Pat |
From various pictures that I've seen of these units, I'd think they could be
handy to have around.. somewhat like a flameless torch. You didn't say whether you have the handpieces (handheld part). I've noticed that some were used with nitrogen instead of air, although I don't know what specific purpose they were used for. I suppose they would be great for setting shrink tubing and working different types of plastics. Plastic welding units have a low air output, more like a whisper of air, not a harsh stream like a blowgun for cleaning. The heat range might be suitable for no-contact desoldering of small to medium sized connections, or possibly larger junctions. I don't think these units would be suitable for a heavy duty application like plumbing connections. Hot air can also be used for curing certain mixtures. Also handy for releasing some types of adhesives. WB ................. "Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
Are you sure it isn't meant ot re expand refrigerated dryed air?
that's the only use I had heard of Ignoramus13229 wrote: On 2005-01-10, Wild Bill wrote: From various pictures that I've seen of these units, I'd think they could be handy to have around.. somewhat like a flameless torch. You didn't say whether you have the handpieces (handheld part). Yes, I do have handpieces. I've noticed that some were used with nitrogen instead of air, although I don't know what specific purpose they were used for. Maybe nitrogen would be useful because it doesnot start a fire as easily, as opposed to hot compressed air. Just a thought. I suppose they would be great for setting shrink tubing and working different types of plastics. Plastic welding units have a low air output, more like a whisper of air, not a harsh stream like a blowgun for cleaning. My unit can be adjusted. The heat range might be suitable for no-contact desoldering of small to medium sized connections, or possibly larger junctions. I don't think these units would be suitable for a heavy duty application like plumbing connections. Hot air can also be used for curing certain mixtures. Also handy for releasing some types of adhesives. Thanks! As one poster noted, blowing hot air can be useful for newsgroup participation! i WB ................ "Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups |
Seriously though, what temperature (range?) does it produce?
I am not sure about the temp range, but by feel I would say 200-300F. If it gets hotter than that, maybe try running something flamable through it to see if you can make a home-made, controllable blow torch / flame shooter? :) Sorry... Just finished my time with a bunch of teenagers at a local group. As a volunteer leader, I'm required to think like them and although it's easy for me, I can't quite shake the thinking for a few days once I do it. :) -- Regards, Joe Agro, Jr. (800) 871-5022 http://www.autodrill.com http://www.multi-spindle-heads.com V8013 |
Ignoramus13229 wrote:
Any thoughts? What would be the practical applications of such a thing? Smaller versions are used on the flight line to shrink tubing. The tool has no parts hot enough to ignite fuel. Kevin Gallimore |
"Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i Good for drying out tanks, if you have a need for that. When steam condensers are offline for an extended period, a device similar to this is used to dry the condenser out and prevent corrosion. Shawn |
also, drying out things with solvent or water in them, and shrinking heat
shrink tubing i Pastics welding of forming? Pat Sounds like a great idea, I will give it a shot! i |
"Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i I have a similar devise. (it is in storage at the moment though) I bought it from OTC ,if I remember correctly. It is about the size of a small cordless screwdriver. I was intended to be used for working on carburetors and thermo circuits on automobiles. Checking the chokes etc.... Blew hot on one end and very Cool on the other. Very neato idea, that's for sure. No idea how it works ??? Cj |
On Tue, 11 Jan 2005 21:43:48 GMT, "Cj Wilson" wrote:
"Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i I have a similar devise. (it is in storage at the moment though) I bought it from OTC ,if I remember correctly. It is about the size of a small cordless screwdriver. I was intended to be used for working on carburetors and thermo circuits on automobiles. Checking the chokes etc.... Blew hot on one end and very Cool on the other. Very neato idea, that's for sure. No idea how it works ??? Cj It'll be a Hilsch Vortex tube. One explanation is he- http://www.artxltd.com/vortex/principle.shtml Mark Rand RTFM |
"Mark Rand" wrote in message ... On Tue, 11 Jan 2005 21:43:48 GMT, "Cj Wilson" wrote: "Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i I have a similar devise. (it is in storage at the moment though) I bought it from OTC ,if I remember correctly. It is about the size of a small cordless screwdriver. I was intended to be used for working on carburetors and thermo circuits on automobiles. Checking the chokes etc.... Blew hot on one end and very Cool on the other. Very neato idea, that's for sure. No idea how it works ??? Cj It'll be a Hilsch Vortex tube. One explanation is he- http://www.artxltd.com/vortex/principle.shtml Mark Rand RTFM Yeah , That's it. That company makes a much nicer one than mine. Thanks for finding the 'How it works' page. A real slick idea ,for when it was first thought out ! Cj |
If its a vortex tube it should have a cold air outlet as well. very handy if
you want to cool a cutting tool without water,oil or mess. Tom "Mark Rand" wrote in message ... On Tue, 11 Jan 2005 21:43:48 GMT, "Cj Wilson" wrote: "Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i I have a similar devise. (it is in storage at the moment though) I bought it from OTC ,if I remember correctly. It is about the size of a small cordless screwdriver. I was intended to be used for working on carburetors and thermo circuits on automobiles. Checking the chokes etc.... Blew hot on one end and very Cool on the other. Very neato idea, that's for sure. No idea how it works ??? Cj It'll be a Hilsch Vortex tube. One explanation is he- http://www.artxltd.com/vortex/principle.shtml Mark Rand RTFM |
Plastic welder?
-- Steve Williams "Ignoramus13229" wrote in message ... I bought two military compressed air heaters, and am now doubting whether I should sell both, or sell one and keep another. What that thing does is connects to air line and blows hot air out of its heated nozzle. Size of two shoeboxes. Kind of cool, but I am not sure what I can do with it that is useful and practical. Still, it is a small nifty thing and I know from my experience that I regretted getting rid of things like that in the past. Any thoughts? What would be the practical applications of such a thing? i ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
"Steve W." wrote in :
Plastic welder? I have, somewhere the drawings of an item like discribed here. It was used in the military for the heating (or cooling) of a thermal suit. Of course it was hooked to compressed air lines, so maybe it wasn't like the one discribed here. my .02 granpaw |
All times are GMT +1. The time now is 11:16 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter