Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Help Needed: Harding 3J chuck stuck
Hello,
While turning close to my chuck my Aloris tool holder handle rubbed on the rubber grip/handle of my Harding-Sjogren 3J chuck and it seems to have tighened it up. Well now I can't undo the chuck to remove a collet. Anyone have some ideas how to loosen it up? It's been a bit tight before but nothing like this. While typing, anyone every take on of these chucks apart? I'm pretty sure it's about time that it needs an internal cleaning etc. I got it from e-bay and the zirk fitting to lubricate it has always been bent slightly so I could replace it while I was cleaning it up. I am heading to the Hardinge WWW site next to see if I can get a manual but thought I would ask here at the same time. Thanks, Jeff |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
stuck chuck | Metalworking | |||
Nova Compac Chuck | Woodturning | |||
Teknatool Titan Chuck draft review | Woodturning | |||
Cuemaking-Metal Lathe Chuck Question? | Metalworking |