Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
FAQ/Guide?
Is there a FAQ or guide floating around on how to clean and setup up a new 7
x 10? |
#2
|
|||
|
|||
Try this:
http://www.mini-lathe.com/ There are also several 7x10 groups on Yahoo. Best Regards, Keith Marshall "I'm not grown up enough to be so old!" "Grady" wrote in message news:PzbAd.11527$c%.920@okepread05... Is there a FAQ or guide floating around on how to clean and setup up a new 7 x 10? |
#3
|
|||
|
|||
On Tue, 28 Dec 2004 05:37:51 -0600, "Grady" calmly
ranted: Is there a FAQ or guide floating around on how to clean and setup up a new 7 x 10? There's a lot of info at www.mini-lathe.com which might be of interest to you, including initial cleaning. - - - - - - - - - - - - - - - - - If God approved of nudity, we all would have been born naked. ----- ----- ----- ----- ----- ----- http://www.diversify.com Your Wild & Woody Website Wonk |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|