Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
grinders
Is there a general concensus as to a good grinder - standard 2 wheel type? I'm
looking for something sturdy. Voltage and phase requirements aren't a problem. TIA. |
#2
|
|||
|
|||
"Vrstull" wrote in message ... Is there a general concensus as to a good grinder - standard 2 wheel type? I'm looking for something sturdy. Voltage and phase requirements aren't a problem. TIA. My local machinist's supply has a small used Diehl grinder. The bearings were unbelievably smooth. Thing just kept on running after being unplugged, virtually noiseless. |
#3
|
|||
|
|||
"Vrstull" wrote in message ... Is there a general concensus as to a good grinder - standard 2 wheel type? I'm looking for something sturdy. Voltage and phase requirements aren't a problem. TIA. The intended use should dictate. In my mind's eye I can see a large grinder, three phase, 12" wheels, 2" wide. Great for a weld shop, not so good for a machine shop, where you might want to sharpen lathe tools. My personal choice for sharpening lathe tools is a grinder mounted about chest height with no work rests. That wouldn't be worth a damn for a weld shop. Harold |
#4
|
|||
|
|||
"Harold & Susan Vordos" wrote in message ... "Vrstull" wrote in message ... Is there a general concensus as to a good grinder - standard 2 wheel type? I'm looking for something sturdy. Voltage and phase requirements aren't a problem. TIA. The intended use should dictate. In my mind's eye I can see a large grinder, three phase, 12" wheels, 2" wide. Great for a weld shop, not so good for a machine shop, where you might want to sharpen lathe tools. That's what I have in my shop, why is it not so good for sharpening lathe tools? |
#5
|
|||
|
|||
"ATP" wrote in message ... "Harold & Susan Vordos" wrote in message ... "Vrstull" wrote in message ... Is there a general concensus as to a good grinder - standard 2 wheel type? I'm looking for something sturdy. Voltage and phase requirements aren't a problem. TIA. The intended use should dictate. In my mind's eye I can see a large grinder, three phase, 12" wheels, 2" wide. Great for a weld shop, not so good for a machine shop, where you might want to sharpen lathe tools. That's what I have in my shop, why is it not so good for sharpening lathe tools? All depends on the nature of the wheels and how they're maintained. If you use the wheels for rough grinding, I doubt you'd have a surface flat enough and smooth running enough to be very successful at sharpening toolbits. The grain size may be a bit coarse, and the wheel too hard for toolbits, too. A soft(er) bond is very desirable for grinding HSS, unlike low carbon steels, where a harder bond is more desirable. Certainly nothing wrong with your choice otherwise. My point is if a guy is going to sharpen toolbits, a smaller grinder makes more sense. If he's going to do heavy duty grinding (weld shop), a smaller grinder makes no sense. Better too large than too small, though. Just match the wheels to the job. You need a basic understanding of wheels in order to do that. Harold |
#6
|
|||
|
|||
(Vrstull) wrote:
Is there a general concensus as to a good grinder - standard 2 wheel type? I'm looking for something sturdy. Voltage and phase requirements aren't a problem. TIA. Some people like the HF 46727 http://www.harborfreight.com/cpi/cta...emnumber=46727 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
wet grinders, vertical movement of stone | Woodturning | |||
Decent angle grinders... | UK diy | |||
SALE: Refurbished Semiconductor Equipment Dicing Saws, Lappers, Cut off, Polishers, Grinders | Metalworking |