Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Myford mandel nose
Hi, a few years ago i bought a short length of metal pre machined with a
Myford ML7 mandrel nose machined on the end, i used this to make an adaptor to take a myford chuck on a dividing head. I now need another one but can't find anybody selling them, the original i bought at a show. I've been through all the common uk suppliers catalogues without success. Can anybody help ?, need a UK supplier. Thanks, Jim Hearne |
#2
|
|||
|
|||
Chronos advertise chuck adapters for rotary table - myford nose eg MFHV6
Dave "Jim Hearne" wrote in message ... Hi, a few years ago i bought a short length of metal pre machined with a Myford ML7 mandrel nose machined on the end, i used this to make an adaptor to take a myford chuck on a dividing head. I now need another one but can't find anybody selling them, the original i bought at a show. I've been through all the common uk suppliers catalogues without success. Can anybody help ?, need a UK supplier. Thanks, Jim Hearne Posted Via Nuthinbutnews.Com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.nuthinbutnews.com |
#3
|
|||
|
|||
Thanks Dave, don't know how i missed that, i'd checked their web site
before. It's got the spare bit on the back but i can chop that off. Thanks, Jim "Dave Garnett" wrote in message ... Chronos advertise chuck adapters for rotary table - myford nose eg MFHV6 Dave "Jim Hearne" wrote in message ... Hi, a few years ago i bought a short length of metal pre machined with a Myford ML7 mandrel nose machined on the end, i used this to make an adaptor to take a myford chuck on a dividing head. I now need another one but can't find anybody selling them, the original i bought at a show. I've been through all the common uk suppliers catalogues without success. Can anybody help ?, need a UK supplier. Thanks, Jim Hearne Posted Via Nuthinbutnews.Com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.nuthinbutnews.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
What tool to use to cut stair nose? | Home Repair | |||
ball nose reamers | Metalworking | |||
Myford Super 7 spindle retrofit? | Metalworking |