Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
FS swinging jib & floor mounted runway
I have the following for sale
1 only Aeromotive 0526200034 floor mounted jib. Unit is for hanging a tool balancer. The arm swings back and forth and has a trolley in the arm for the balancer. Arm length is 3 feet. This unit is mounted to the floor but must also be bolt to a bench to prevent the upright from flexing. 1 only Aeromotive 0544100064 double floor mounted runway with trolley. This is intended to be bolt to the floor as well as a wall or workbench. Both items were installed but not used because intended use did not included mounting to a bench or wall. All items are located in Southwestern Ontario Canada. If I don't get any offers I'll have to install it in my shop and come up with a use for it!! Doug -- Posted via Mailgate.ORG Server - http://www.Mailgate.ORG |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How do I stop door from swinging open (or closed)? | Home Repair |