DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Dune Buggy Plans (https://www.diybanter.com/metalworking/71233-re-dune-buggy-plans.html)

Gary Brady September 18th 04 05:20 PM

Dune Buggy Plans
 
Take a look at sandrail.com. Lots of stuff there.Two books you might want
to look at a
"Building you VW based Dune Buggy, Peter Ezell, John Quan, Quazell Technical
Publishers"
"Baja Bugs and Buggies, Jeff Hibbard, HP Books"

Ebay, Amazon, or abebooks probably should have these.

--
Gary Brady
Austin, TX
www.powdercoatoven.4t.com
"VW Golf Cart" wrote in message
...
Friends and I are planning on building a Dune Buggy.
Need some info on building a Dune Buggy. Need any information on this
subject, like frame building plans, suspension parts, motor info, etc.

Thanks,

Steve





Tom Zachman September 19th 04 12:45 AM

A little ot, but is anyone familiar with Oklahoma's "Little Sahara?"
"VW Golf Cart" wrote in message
...
Friends and I are planning on building a Dune Buggy.
Need some info on building a Dune Buggy. Need any information on this
subject, like frame building plans, suspension parts, motor info, etc.

Thanks,

Steve






-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Gary Brady September 19th 04 04:35 AM

Never been there, but I know it's popular with the ATV crowd.

--
Gary Brady
Austin, TX
www.powdercoatoven.4t.com
"Tom Zachman" wrote in message
...
A little ot, but is anyone familiar with Oklahoma's "Little Sahara?"
"VW Golf Cart" wrote in message
...
Friends and I are planning on building a Dune Buggy.
Need some info on building a Dune Buggy. Need any information on this
subject, like frame building plans, suspension parts, motor info, etc.

Thanks,

Steve






-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----




sledin January 25th 05 05:52 AM

Drew,
Bruce is draftsman, not an engineer. I whatched him change his story over
time. He had built two cars when he decided to knock off ideas from The
Edge products in Australia. Some say there are parts from the Desertkarts
plans book too.
It's a cool looking car. The roll cage is too skinny to keep your head
from hitting the ground if you go over. Be carefull.



All times are GMT +1. The time now is 04:52 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter