Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
https://www.amazon.com/gp/product/B01HIIFFH4
I can use the odd diameters. Seems the case plastic is soft, making reinserting the small bits a chore (maybe some silicon/Teflon lubricant will help, if it lasts). The bit holder extender has a much more powerful magnet than other cheapos. Yea! My grinder and drill sharpener turned the other (wood?) 8 mm bit into an extra bit to be used on aluminum. Apparently the same cannot be done to the masonry bits since their flutes are dull. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|