Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Indicating an Internal Thread
I need to indicate an internal thread. It is a 2 1/4-8 thread and it
is on a backplate. Someone bored the register off center and I need to bore and resleeve the backplate but the register bore has got to be on the same centerline as the thread to make this work. I have the back plate set up in the 4 jaw now I just need to figure out how to dial it in so the bore and the thread centerline line up. Any suggestions greatly appreciated. Thanks, Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
High Alloys and turning threads | Metalworking | |||
HELP: Single Point Thread Cutting | Metalworking | |||
Sorby threading tools | Woodturning | |||
Questions on repairing/replacing damaged thread in aluminum engine head. | Metalworking | |||
Big threads with 1-1/2 inch Beall Thread cutter | Woodworking |