Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
sorta ot- honda quality!
I picked up this '75 Honda CB360 for $50.00 and i planned on parting it out.
It was laying on it's side in a yard with a bunch of wrecked cars and trucks around it. I found a set of carbs on ebay and fiddled with it for a couple days. Well the thing runs and works great! This bike was last inspected in 1986 and it sat outside through the winters of NY and she still runs. I stuck about $50.00 worth of parts into it just so it looks, runs, and stops good (and some flat black paint and elbow grease). Any ideas for it would be appreciated. I was thinking of making it a hill climber and extending the ass end of it, or just a beater bike for the trails around here. pic: http://www.geocities.com/weldingwalt..._360_done1.jpg walt |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Quality of Starret band saw blades--opinions | Metalworking | |||
Kitchen Cabinet Quality Differences | UK diy | |||
Wall tiles: low quality print? | UK diy | |||
New Honda HS1132TAS Snowblower engine problems | Home Repair |