Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Low-exotherm epoxy for castings
No, I am not a shill for MasterBond, but they do make a lot of neat materials that could be of use to some folks here.
Here's a low-exotherm epoxy you can use even for large castings. If you've ever tried to make one that was too big for the epoxy you're using, you know what a stinking, cracked mess you can wind up with: https://www.masterbond.com/enews/low...e-casting.html -- Ed Huntress |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Vermont Castings Pellet stove | Home Ownership | |||
College Engineering gear hobber castings set | Metalworking | |||
working with rough aluminum castings? | Metalworking | |||
low-temp melt castings basics | Metalworking | |||
Vermont Castings Winterwarm Small | Home Ownership |