Spot welders?
 

--Hi gang. I'm looking to get my hands on a spot welder. 220v single phase power available and hope to get something I can put on a pestal (I'll make one) and use to tack stuff together, probably no more than 1/16" thick but ya never know. I understand that a decent machine has variable current and variable time control and that would seem to be the minimum requirement beyond enough power to get the job done. Recommendations welcome.

Spot welders?
 

Ed - there was a thread on this group a year or two ago about the trouble
a fellow was having with aluminum on one of Miller's small spot welders.
You might find that if you can find an historical source. Google maybe?

Hul

SteamboatEd Haas wrote:
--Hi gang. I'm looking to get my hands on a spot welder. 220v single phase power available and hope to get something I can put on a pestal (I'll make one) and use to tack stuff together, probably no more than 1/16" thick but ya never know. I understand that a decent machine has variable current and variable time control and that would seem to be the minimum requirement beyond enough power to get the job done. Recommendations welcome.

Spot welders?
 

On Fri, 15 Dec 2017 13:18:10 -0800 (PST), SteamboatEd Haas
wrote:

--Hi gang. I'm looking to get my hands on a spot welder. 220v single phase power available and hope to get something I can put on a pestal (I'll make one) and use to tack stuff together, probably no more than 1/16" thick but ya never know. I understand that a decent machine has variable current and variable time control and that would seem to be the minimum requirement beyond enough power to get the job done. Recommendations welcome.


Ebay.

Next would be Craigslist

third would be a machinery dealer.

The big question is..and you will need to figure it out..is how many
amps do you need for your projects..both now and later?

The Harbor Freight spot welders will do 1/16" weldments easily.

They certainly wont do much more than that however....ever.

https://www.twi-global.com/technical...g-application/

https://www.ebay.com/itm/ELECTRIC-SP...Y/270675536704
https://www.ebay.com/itm/Peer-spot-welders/232282238536

https://www.harborfreight.com/240-vo...der-61206.html

https://www.youtube.com/watch?v=Sk7oNf4bF0E

Oh...and remember...stainless steel rating is about 1/2 of mild steel
for spot welding...IE..you will need 100% more to spot weld SS than
you need for mild steel.


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Spot welders?
 

On Friday, December 15, 2017 at 9:58:30 PM UTC-8, Gunner Asch wrote:

Ebay.
--Yah that's where I'm looking.

Next would be Craigslist
--Been there, done that; no joy.

third would be a machinery dealer.
--Hmmm will take a look; sorta forgot they were out there!

The big question is..and you will need to figure it out..is how many
amps do you need for your projects..both now and later?
The Harbor Freight spot welders will do 1/16" weldments easily.
--Went there yesterday and had a look at their 110 and 220 machines: real POS that I wouldn't want in my shop. Changing electrodes is a real pain, no spring return on activation lever, poorly protected wiring etc. And yes some day I'd like the option of doing stuff up to maybe 1/8 or 3/16" thick.

https://www.twi-global.com/technical...g-application/
--Cool site; thanks for that!

https://www.ebay.com/itm/ELECTRIC-SP...Y/270675536704
https://www.ebay.com/itm/Peer-spot-welders/232282238536

https://www.harborfreight.com/240-vo...der-61206.html

https://www.youtube.com/watch?v=Sk7oNf4bF0E

Oh...and remember...stainless steel rating is about 1/2 of mild steel
for spot welding...IE..you will need 100% more to spot weld SS than
you need for mild steel.
--How odd; it's the reverse for TIG welding..

Spot welders?
 

Thanks for all the input gang! As it turns out I found a Miller on the Nextdoor network, less than 10 miles from my digs. It's 220v and has the Miller stand with the foot pedal. I got an extra pair of arms including one for getting inside deep stuff. All I had to do to get it working in my shop was change the plug to a proper twist lock type. Happy happy!