Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 5,888
Default Ping Jim Wilkins: Audio filter

wrote in message
...
On Friday, April 7, 2017 at 5:30:08 PM UTC-4, Clare wrote:
On Fri, 7 Apr 2017 08:51:21 -0700 (PDT),
wrote:

Yo Jim -- and anyone else who may be interested.

I spend an hour last night tracking down some noises in my furnace
blower, using my usual piece of aquarium hose stuck in my ear g,
and I wondered if there might be a market for an advanced kind of
mechanic's stethoscope -- something that ought to be a piece of
cake for someone like you.

Maybe something like this is on the market. If so, forget it. If
not, consider this:

I had two noises, from different sources, and the interference
between them made it all but impossible to find the origins of the
noises. One was some mechanical interference between the
centrifugal fan and its housing, at one end of the armature shaft;
the other was vibration resulting from stickiness in the
centrifugal throw-out switch (a fail-safe switch that prevents the
gas valve from opening), at the other end of the shaft. I finally
took the whole thing apart and found both problems, but it wasn't
easy to find them when the motor wasn't running.

So, I wondered about the idea of making a small, cheap,
battery-powered amplifier, with a mike and a headphone jack, that
contained a couple of active, adjustable audio filters, one
high-pass and another low-pass. Made a notching filter or bandpass
filter to make it slick.

I don't play with engines much these days, but I can recall times
when such a device would have made quick work of tracking down
engine noises.

There it is. If you make it and sell it, the idea is yours. Watch
out for patents.

They have been on the market for decades.. Steelman Engine-ear and
Chassis-Ear, along with 8-Mile-Lake and SKF TMST3 are pretty common
in
the industry. The Chassis-Ear has several remote sensors you can
install in multiple places and switch between them on the run.


Too little, too late, once again. g
Ed Huntress

=====================
Don't feel bad, I was the assistant to brilliant engineers working at
the leading edge yet I never invented anything commercially valuable.
All my contributions were kick-yourself-for-missing-it simple.
-jsw


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ping Jim Wilkins, Holtzapffel Vol 5 available Leon Fisk Metalworking 0 October 29th 12 05:51 PM
Ping Jim Wilkins Ned Simmons Metalworking 2 March 4th 12 12:34 AM
Paging Mr Wilkins ... Snag[_3_] Metalworking 1 August 8th 11 08:04 PM
Audio amp replacement filter caps ??? Asimov Electronics Repair 1 January 27th 04 02:55 AM


All times are GMT +1. The time now is 08:24 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"