Jet JTM-830 owner / user manual
 

Have a Jet JTM-830 Vert. mill that is serving me very well. Appears
this model is no longer made, serviced or supported sigh.

And I appear to have lost the users manual for same.

Tried the Jet support folks and all they had was an exploded parts
view and part numbers.
(which, I suppose, won't be of much use if they are no longer
supporting this unit)

Any one out there have an owner / user manual for this model and would
be willing to copy same?


Thanks

Bob
rgentryatozdotnet

Jet JTM-830 owner / user manual
 

Might work -
http://www.ozarkwoodworker.com/15HP-...Asian_p_1.html


"Bob Gentry" wrote in message
...
Have a Jet JTM-830 Vert. mill that is serving me very well. Appears
this model is no longer made, serviced or supported sigh.

And I appear to have lost the users manual for same.

Bob
rgentryatozdotnet

Jet JTM-830 owner / user manual
 

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830

http://www.jettools.com/us/en/servic...eyword=JVM-836

Jet JTM-830 owner / user manual
 

On Mon, 19 Oct 2015 22:39:23 -0600, "Larry Fisk"
wrote:

Might work -
http://www.ozarkwoodworker.com/15HP-...Asian_p_1.html


"Bob Gentry" wrote in message
.. .
Have a Jet JTM-830 Vert. mill that is serving me very well. Appears
this model is no longer made, serviced or supported sigh.

And I appear to have lost the users manual for same.

Bob
rgentryatozdotnet

----------------------------------------------------------------------------------------
BINGO!!

Just like mine. Thanks Larry!!!

Got a copy on order.

:) Bob :)
rgentryatozdotnet

Jet JTM-830 owner / user manual
 

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830

http://www.jettools.com/us/en/servic...eyword=JVM-836
-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet

Jet JTM-830 owner / user manual
 

On Tue, 20 Oct 2015 20:51:54 -0700, Bob Gentry wrote:

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830

http://www.jettools.com/us/en/servic...eyword=JVM-836
-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet

Sorry Bob..thought you had a 836. Must have read it wrong.

http://cdn0.grizzly.com/manuals/g0678_m.pdf

Jet JTM-830 owner / user manual
 

On Tue, 20 Oct 2015 20:51:54 -0700, Bob Gentry wrote:

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830

http://www.jettools.com/us/en/servic...eyword=JVM-836
-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet

Also

http://kinzers.com/don/MachineTools/Grizzly_G1004/

Jet JTM-830 owner / user manual
 

On Sat, 24 Oct 2015 06:32:27 -0700, Gunner Asch
wrote:

On Tue, 20 Oct 2015 20:51:54 -0700, Bob Gentry wrote:

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830

http://www.jettools.com/us/en/servic...eyword=JVM-836
-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet

Also

http://kinzers.com/don/MachineTools/Grizzly_G1004/
------------------------------------------------------------------------------------
That unit is 'similar' to mine, enough so that I could use his mods
for the power feed as a starting point for adding one to mine.

Thanks for the link!

Bob
rgentryatozdotnet

Jet JTM-830 owner / user manual
 

On Sat, 24 Oct 2015 07:17:12 -0700, Bob Gentry wrote:

On Sat, 24 Oct 2015 06:32:27 -0700, Gunner Asch
wrote:

On Tue, 20 Oct 2015 20:51:54 -0700, Bob Gentry wrote:

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830

http://www.jettools.com/us/en/servic...eyword=JVM-836
-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet

Also

http://kinzers.com/don/MachineTools/Grizzly_G1004/
------------------------------------------------------------------------------------
That unit is 'similar' to mine, enough so that I could use his mods
for the power feed as a starting point for adding one to mine.

Thanks for the link!

Bob
rgentryatozdotnet

Jervelcomin!!

Gunner