Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 99
Default Jet JTM-830 owner / user manual

Have a Jet JTM-830 Vert. mill that is serving me very well. Appears
this model is no longer made, serviced or supported sigh.

And I appear to have lost the users manual for same.

Tried the Jet support folks and all they had was an exploded parts
view and part numbers.
(which, I suppose, won't be of much use if they are no longer
supporting this unit)

Any one out there have an owner / user manual for this model and would
be willing to copy same?


Thanks

Bob
rgentryatozdotnet
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 13
Default Jet JTM-830 owner / user manual

Might work -
http://www.ozarkwoodworker.com/15HP-...Asian_p_1.html


"Bob Gentry" wrote in message
...
Have a Jet JTM-830 Vert. mill that is serving me very well. Appears
this model is no longer made, serviced or supported sigh.

And I appear to have lost the users manual for same.

Bob
rgentryatozdotnet


  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 10,399
Default Jet JTM-830 owner / user manual

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830


http://www.jettools.com/us/en/servic...eyword=JVM-836

  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 99
Default Jet JTM-830 owner / user manual

On Mon, 19 Oct 2015 22:39:23 -0600, "Larry Fisk"
wrote:

Might work -
http://www.ozarkwoodworker.com/15HP-...Asian_p_1.html


"Bob Gentry" wrote in message
.. .
Have a Jet JTM-830 Vert. mill that is serving me very well. Appears
this model is no longer made, serviced or supported sigh.

And I appear to have lost the users manual for same.

Bob
rgentryatozdotnet

----------------------------------------------------------------------------------------
BINGO!!

Just like mine. Thanks Larry!!!

Got a copy on order.

Bob
rgentryatozdotnet
  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 99
Default Jet JTM-830 owner / user manual

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830


http://www.jettools.com/us/en/servic...eyword=JVM-836

-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet


  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 10,399
Default Jet JTM-830 owner / user manual

On Tue, 20 Oct 2015 20:51:54 -0700, Bob Gentry wrote:

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830


http://www.jettools.com/us/en/servic...eyword=JVM-836

-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet


Sorry Bob..thought you had a 836. Must have read it wrong.

http://cdn0.grizzly.com/manuals/g0678_m.pdf

  #7   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 10,399
Default Jet JTM-830 owner / user manual

On Tue, 20 Oct 2015 20:51:54 -0700, Bob Gentry wrote:

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830


http://www.jettools.com/us/en/servic...eyword=JVM-836

-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet


Also

http://kinzers.com/don/MachineTools/Grizzly_G1004/

  #8   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 99
Default Jet JTM-830 owner / user manual

On Sat, 24 Oct 2015 06:32:27 -0700, Gunner Asch
wrote:

On Tue, 20 Oct 2015 20:51:54 -0700, Bob Gentry wrote:

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830

http://www.jettools.com/us/en/servic...eyword=JVM-836

-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet


Also

http://kinzers.com/don/MachineTools/Grizzly_G1004/

------------------------------------------------------------------------------------
That unit is 'similar' to mine, enough so that I could use his mods
for the power feed as a starting point for adding one to mine.

Thanks for the link!

Bob
rgentryatozdotnet
  #9   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 10,399
Default Jet JTM-830 owner / user manual

On Sat, 24 Oct 2015 07:17:12 -0700, Bob Gentry wrote:

On Sat, 24 Oct 2015 06:32:27 -0700, Gunner Asch
wrote:

On Tue, 20 Oct 2015 20:51:54 -0700, Bob Gentry wrote:

On Mon, 19 Oct 2015 23:38:10 -0700, Gunner Asch
wrote:

On Mon, 19 Oct 2015 20:28:04 -0700, Bob Gentry wrote:

Jet JTM-830

http://www.jettools.com/us/en/servic...eyword=JVM-836
-------------------------------------------------------------------------
Thanks for the comeback Gunner. . . however. . . grin That is quite
a different mill from my little 830.
Would be nice to have one like that but don't know where I'd put it.
sigh

The lead from Larry was spot on. Got a copy on order.

Thanks again

Bob
rgentryatozdotnet


Also

http://kinzers.com/don/MachineTools/Grizzly_G1004/

------------------------------------------------------------------------------------
That unit is 'similar' to mine, enough so that I could use his mods
for the power feed as a starting point for adding one to mine.

Thanks for the link!

Bob
rgentryatozdotnet


Jervelcomin!!

Gunner
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pioneer DJM600 user manual or service manual wanted powerampfreak Electronics Repair 1 April 7th 07 12:36 AM
User manual help [email protected] Electronics Repair 9 December 12th 06 11:45 AM
WANTED: Pioneer PRO-1009W Service manual and User manual 427Cobraman Electronics Repair 0 April 2nd 06 02:54 AM
TV user manual PigPOg UK diy 9 November 22nd 05 09:29 AM
first time bandsaw user/owner blade question Wookie Woodworking 4 February 29th 04 04:01 AM


All times are GMT +1. The time now is 01:33 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"