DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   ?Acetone vs Laquer Thinner? (https://www.diybanter.com/metalworking/378230-re-acetone-vs-laquer-thinner.html)

[email protected] June 5th 15 04:14 PM

?Acetone vs Laquer Thinner?
 
On Wednesday, July 29, 1998 at 3:00:00 AM UTC-4, Byron D. Krohn wrote:
Please explain the difference between Acetone and Laquer Thinner.


Thanks,



Byron, in Austin, Texas


Computer techies like acetone very well for removing heatsink compounds and adhesives. Denatured alcohol may then be invoked for any remaining residue.. (Denatured alcohol evaporates more slowly.)

I noted recently that a speaker repair tech on youtube uses lacquer thinner to clean up speaker gasket adhesive, instead: So I end up here wondering about solvents.

A cabbie friend of mine before had generally used paint thinner to get rid of stickers on cars: I pointed out why I prefer acetone for that instead. It's far less nasty, smelly, and it evaporates really quickly. He appreciated the info, tried it out, and agreed. (We knew about WD-40, too.)

Acetone definitely is fine also for removing cyanoacrylate ("super glue")--it's the main ingredient in nail polish remover. Again, it's far "nicer" than paint thinner for that.

I like acetone since it evaporates quickly: That makes it sometimes a less effective solvent, though. I'm considering obtaining a small can of lacquer thinner--it's not essential, though: I've used acetone before in speaker repair.

Thanks to everybody here!

Ed Huntress June 5th 15 04:37 PM

?Acetone vs Laquer Thinner?
 
On Fri, 5 Jun 2015 08:14:30 -0700 (PDT), wrote:

On Wednesday, July 29, 1998 at 3:00:00 AM UTC-4, Byron D. Krohn wrote:
Please explain the difference between Acetone and Laquer Thinner.


Thanks,



Byron, in Austin, Texas


Computer techies like acetone very well for removing heatsink compounds and adhesives. Denatured alcohol may then be invoked for any remaining residue. (Denatured alcohol evaporates more slowly.)

I noted recently that a speaker repair tech on youtube uses lacquer thinner to clean up speaker gasket adhesive, instead: So I end up here wondering about solvents.

A cabbie friend of mine before had generally used paint thinner to get rid of stickers on cars: I pointed out why I prefer acetone for that instead. It's far less nasty, smelly, and it evaporates really quickly. He appreciated the info, tried it out, and agreed. (We knew about WD-40, too.)

Acetone definitely is fine also for removing cyanoacrylate ("super glue")--it's the main ingredient in nail polish remover. Again, it's far "nicer" than paint thinner for that.

I like acetone since it evaporates quickly: That makes it sometimes a less effective solvent, though. I'm considering obtaining a small can of lacquer thinner--it's not essential, though: I've used acetone before in speaker repair.

Thanks to everybody here!


Acetone is acetone. g Lacquer thinner is any of a variety of
volatile solvent mixtures, tailored to the lacquer type and to the
method and conditions of applying the lacquer. These are sometimes
known as "hot" (or fast-evaporating) and "cool" (or slow) types.

Acetone dissolves a narrower range of materials than lacquer thinner
does. It's a component of most lacquer thinners, and it's the part
that (usually) evaorates first. Lacquer thinner needs some
slower-drying components, because it's the partial or exclusive
solvent in lacquers, and you'll get a dry, dusty lacquer coating when
you spray it, if the solvent dries too fast.

Lacquer thinners dissolve and attack all sorts of organic coatings and
other materials. Be careful using it; it will wreck many types of
finishes.

--
Ed Huntress

Bob Engelhardt June 5th 15 05:31 PM

?Acetone vs Laquer Thinner?
 
On 6/5/2015 11:14 AM, wrote:

... paint thinner ... I prefer acetone ... It's far less nasty, smelly, and it evaporates really quickly. ...


Acetone is "less nasty, smelly" than paint thinner?? Not in my book.
Paint thinner is in same class as lamp oil, charcoal starter, and
kerosene. All quite benign solvents. Acetone is an aggressive solvent
- great care should be used on most plastics and paints.

Try this: wash one finger with acetone & another with paint thinner.
Notice how the acetone-d one is extremely dry from having the skin oils
dissolved & the paint thin-ed one hardly at all?

As to the smelly-ness, I'll concede that it is in the nose of the
beholder & not up for objective dispute.

Bob


Leon Fisk June 5th 15 07:21 PM

?Acetone vs Laquer Thinner?
 
On Fri, 5 Jun 2015 08:14:30 -0700 (PDT)
wrote:

snip
A cabbie friend of mine before had generally used paint thinner to get rid of stickers on cars...


I like using Goo Gone for sticker residue. Peal off as much sticker as
you can, the more the better and then use Goo Gone with a paper tool to
remove the sticky stuff left. A whole lot less smelly, volatile than
any of those thinners you mentioned. Lacquer thinner may evaporate,
leave little residue, but can do a lot of damage to things that aren't
metal or glass...

--
Leon Fisk
Grand Rapids MI/Zone 5b
Remove no.spam for email



All times are GMT +1. The time now is 12:04 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter