DIYbanter - Tyzack Zyko Lathe Info?

DIYbanter (https://www.diybanter.com/)

- Metalworking (https://www.diybanter.com/metalworking/)

- - Tyzack Zyko Lathe Info? (https://www.diybanter.com/metalworking/373632-re-tyzack-zyko-lathe-info.html)

August 22nd 14 03:59 PM

Tyzack Zyko Lathe Info?

On Monday, July 26, 1999 8:00:00 AM UTC+1, wrote:
On Fri, 23 Jul 1999 09:24:00 GMT, (Tony Jeffree)
wrote:

The 3 3/8" lathe from Tyzack is "ZYTO" not "ZYKO". You need to bend a
bit further...

:-)
You're right. My apologies.

Remember, there are no marsupials in my correct e-mail address.

Hi

If you are still out there in 2014, is it possible you could send a copy/pic etc of the change wheel plate info.? Its only been 15 years. Thought I would try anyway.

Regards

Alan

[email protected]

September 30th 15 07:13 PM

Tyzack Zyko Lathe Info?

On Friday, August 22, 2014 at 3:59:50 PM UTC+1, wrote:
On Monday, July 26, 1999 8:00:00 AM UTC+1, wrote:
On Fri, 23 Jul 1999 09:24:00 GMT, (Tony Jeffree)
wrote:

The 3 3/8" lathe from Tyzack is "ZYTO" not "ZYKO". You need to bend a
bit further...

:-)

If you are still out there in 2014, is it possible you could send a copy/pic etc of the change wheel plate info.? Its only been 15 years. Thought I would try anyway.

Regards

Alan

On Friday, August 22, 2014 at 3:59:50 PM UTC+1, wrote:
On Monday, July 26, 1999 8:00:00 AM UTC+1, wrote:
On Fri, 23 Jul 1999 09:24:00 GMT, (Tony Jeffree)
wrote:

The 3 3/8" lathe from Tyzack is "ZYTO" not "ZYKO". You need to bend a
bit further...

:-)
You're right. My apologies.

Remember, there are no marsupials in my correct e-mail address.

Hi

If you are still out there in 2014, is it possible you could send a copy/pic etc of the change wheel plate info.? Its only been 15 years. Thought I would try anyway.

Regards

Alan

Hi, 2015 now! I can send you a photo of the change wheel plate info if you still need it.
Regards,

Barry

All times are GMT +1. The time now is 11:15 PM.