 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Tyzack Zyko Lathe Info?
On Monday, July 26, 1999 8:00:00 AM UTC+1, wrote:
On Fri, 23 Jul 1999 09:24:00 GMT, (Tony Jeffree) wrote: The 3 3/8" lathe from Tyzack is "ZYTO" not "ZYKO". You need to bend a bit further... :-) You're right. My apologies. Remember, there are no marsupials in my correct e-mail address. Hi If you are still out there in 2014, is it possible you could send a copy/pic etc of the change wheel plate info.? Its only been 15 years. Thought I would try anyway. Regards Alan |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Tyzack Zyko Lathe Info?
On Friday, August 22, 2014 at 3:59:50 PM UTC+1, wrote:
On Monday, July 26, 1999 8:00:00 AM UTC+1, wrote: On Fri, 23 Jul 1999 09:24:00 GMT, (Tony Jeffree) wrote: The 3 3/8" lathe from Tyzack is "ZYTO" not "ZYKO". You need to bend a bit further... :-) If you are still out there in 2014, is it possible you could send a copy/pic etc of the change wheel plate info.? Its only been 15 years. Thought I would try anyway. Regards Alan On Friday, August 22, 2014 at 3:59:50 PM UTC+1, wrote: On Monday, July 26, 1999 8:00:00 AM UTC+1, wrote: On Fri, 23 Jul 1999 09:24:00 GMT, (Tony Jeffree) wrote: The 3 3/8" lathe from Tyzack is "ZYTO" not "ZYKO". You need to bend a bit further... :-) You're right. My apologies. Remember, there are no marsupials in my correct e-mail address. Hi If you are still out there in 2014, is it possible you could send a copy/pic etc of the change wheel plate info.? Its only been 15 years. Thought I would try anyway. Regards Alan Hi, 2015 now! I can send you a photo of the change wheel plate info if you still need it. Regards, Barry |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| looking for info on Edelstaal 12 in lathe. | Metalworking | |||
| Info Please: Dalton Lathe | Metalworking | |||
| Need info on lathe - Gerry's Tool Wood copy lathe | Woodturning | |||
| Sheldon lathe info, please... | Metalworking | |||
| Delta 46-255 lathe info | Woodturning | |||
Linear Mode
