 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
rifling button pusher
I just bought a rifling button so I can make my own 9mm barrels
http://tinyurl.com/kdn8mzg You need a five ton press to push this button down a barrel to form the rifling. OK, what would be the highest strength steel i can get for the pusher. I looked for HSS and couldn't find anything long enough. looked for already hardened drill rod. It must be out there but no joy so far. My first barrels will be 12", want to do 16" in the future. Karl |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Button Pusher for Time-Lapse Photography | Electronic Schematics | |||
| Button Pusher for Time-Lapse Photography - ButtonPusher4-Selfpic in mirror.jpg | Electronic Schematics | |||
| Button Pusher for Time-Lapse Photography - ButtonPusher3-Setup.jpg | Electronic Schematics | |||
| Button Pusher for Time-Lapse Photography - ButtonPusher2-Pieces.jpg | Electronic Schematics | |||
| Button Pusher for Time-Lapse Photography - ButtonPusher1-Schematic.jpg | Electronic Schematics | |||
Threaded Mode
