Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
Bad news is that this needs to go to a repair shop. It'll probably take a refinishing after the dents are removed. They may be able to use the set of magnets I saw for doing this sort of thing, has graduated sizes of RE ball magnets and one padded and curved magnet for moving them around. They cost more than a new trumpet, so not something for a one-off fix. It also looked like it would take a skilled hand to do it and not end up with a stretched-out mess.
Stan |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Need advice on emergency bent trumpet horn repair | Home Repair | |||
DEFCOM 1 EMERGENCY EMERGENCY EMERGENCY EMERGENCY EMERGENCY LISTEN TO | Home Repair | |||
Not really Home repair: Repairing cracked horn (antler) handles | Home Repair |