Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
Milady went on a shop trip yesterday. On the list was get the biggest
damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
On 20/08/13 11:36, Karl Townsend wrote:
Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl What sort of power requirement is there. Type of belt required. Are you intending to use a V belt or would a poly V do the job. A poly V can be run on a flat surface IIRC the drive ratio is over 5:1 so you just need a poly V for the driver not the driven. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
On Tue, 20 Aug 2013 05:36:27 -0500, Karl Townsend
wrote: Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl What kind of pulley? Something to turn a small belt? Or something thats 18" in diameter and weighs 75 lbs? Swamp cooler pully or bigger? "There are no leftists in mainstream American politics. Just two right wing parties, one hard right and one softer." Christopher A. Lee, 8/18/2013 |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
"Karl Townsend" wrote in message ... Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Air compressors typically have a big ass pulley; the 5hp one that harbor freight sells takes a pair of 5/8 belts and it keys onto a tapered shaft that's appx an inch at the large diameter. |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
"Karl Townsend" wrote in message ... Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. http://www.ebay.com/itm/WOODS-BELLY-...-/111112244149 Probably fits the RM 59 also. |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
On Tue, 20 Aug 2013 05:36:27 -0500, Karl Townsend
wrote: Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl follow up. Surplus center has a good selection, i went there. |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
"Karl Townsend" wrote in message
... Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl Come on down to Yuma for a day. After we get back from fishing you can take this big ass pulley that's been laying in my back yard for the last 7 or 8 years home with you. It looks like cast iron, so probably not weldable, but you could certainly bolt it to a weldable hub. I didn't measure it, but it looks to be a bout 24". I sell it to you for a dollar if you pick it up, but if you ask me to ship it the handling fee will be horrific. LOL. http://www.yumabassman.com/pictures/big%20pulley.jpg |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
On Tue, 20 Aug 2013 11:02:04 -0700, "Bob La Londe"
wrote: "Karl Townsend" wrote in message .. . Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. FISHING!? in Yuma as in AZ? Didn't think the fish did well under the catcus. I'm a sucker for fishing anyplace. Wish i had time right now. Got about ten days till the storm (fall harvest) hits. I am counting the days till FL fishing already. This year i have to fish out of a 38' catamaran with twin diesels, 14' beam. I know, its a dirty job, but somebody has to do it. VBG Karl Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl Come on down to Yuma for a day. After we get back from fishing you can take this big ass pulley that's been laying in my back yard for the last 7 or 8 years home with you. It looks like cast iron, so probably not weldable, but you could certainly bolt it to a weldable hub. I didn't measure it, but it looks to be a bout 24". I sell it to you for a dollar if you pick it up, but if you ask me to ship it the handling fee will be horrific. LOL. http://www.yumabassman.com/pictures/big%20pulley.jpg |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
On 8/20/2013 12:00 PM, Karl Townsend wrote:
On Tue, 20 Aug 2013 11:02:04 -0700, "Bob La Londe" wrote: "Karl Townsend" wrote in message ... Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. FISHING!? in Yuma as in AZ? Didn't think the fish did well under the catcus. I'm a sucker for fishing anyplace. Wish i had time right now. Got about ten days till the storm (fall harvest) hits. I am counting the days till FL fishing already. This year i have to fish out of a 38' catamaran with twin diesels, 14' beam. I know, its a dirty job, but somebody has to do it. VBG Karl Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl Come on down to Yuma for a day. After we get back from fishing you can take this big ass pulley that's been laying in my back yard for the last 7 or 8 years home with you. It looks like cast iron, so probably not weldable, but you could certainly bolt it to a weldable hub. I didn't measure it, but it looks to be a bout 24". I sell it to you for a dollar if you pick it up, but if you ask me to ship it the handling fee will be horrific. LOL. http://www.yumabassman.com/pictures/big%20pulley.jpg fishing, as in the colorado river runs through the middle of yuma (who's motto is: you gotta have a sense of yuma). |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
"Karl Townsend" wrote in message
... On Tue, 20 Aug 2013 11:02:04 -0700, "Bob La Londe" wrote: "Karl Townsend" wrote in message . .. Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. FISHING!? in Yuma as in AZ? Didn't think the fish did well under the catcus. Now that you mention it, I don't think I have ever caught one out from under a cactus, but I have yanked a few out from under palm trees and mesquite trees. I think I've even pulled a few bass out through the branches of an iron wood or two. |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
On Tue, 20 Aug 2013 14:00:16 -0500, Karl Townsend
wrote: On Tue, 20 Aug 2013 11:02:04 -0700, "Bob La Londe" wrote: "Karl Townsend" wrote in message . .. Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. FISHING!? in Yuma as in AZ? Didn't think the fish did well under the catcus. I'm a sucker for fishing anyplace. Wish i had time right now. Got about ten days till the storm (fall harvest) hits. I am counting the days till FL fishing already. This year i have to fish out of a 38' catamaran with twin diesels, 14' beam. I know, its a dirty job, but somebody has to do it. VBG 14' beam on a 38' cat? That sucker will flip over the first whitecaps that show up. Karl Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl Come on down to Yuma for a day. After we get back from fishing you can take this big ass pulley that's been laying in my back yard for the last 7 or 8 years home with you. It looks like cast iron, so probably not weldable, but you could certainly bolt it to a weldable hub. I didn't measure it, but it looks to be a bout 24". I sell it to you for a dollar if you pick it up, but if you ask me to ship it the handling fee will be horrific. LOL. http://www.yumabassman.com/pictures/big%20pulley.jpg "There are no leftists in mainstream American politics. Just two right wing parties, one hard right and one softer." Christopher A. Lee, 8/18/2013 |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
"Gunner Asch" wrote in message
news On Tue, 20 Aug 2013 14:00:16 -0500, Karl Townsend wrote: On Tue, 20 Aug 2013 11:02:04 -0700, "Bob La Londe" wrote: "Karl Townsend" wrote in message ... Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. FISHING!? in Yuma as in AZ? Didn't think the fish did well under the catcus. I'm a sucker for fishing anyplace. Wish i had time right now. Got about ten days till the storm (fall harvest) hits. I am counting the days till FL fishing already. This year i have to fish out of a 38' catamaran with twin diesels, 14' beam. I know, its a dirty job, but somebody has to do it. VBG 14' beam on a 38' cat? That sucker will flip over the first whitecaps that show up. He probably doesn't mean a sailing cat. Karl Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl Come on down to Yuma for a day. After we get back from fishing you can take this big ass pulley that's been laying in my back yard for the last 7 or 8 years home with you. It looks like cast iron, so probably not weldable, but you could certainly bolt it to a weldable hub. I didn't measure it, but it looks to be a bout 24". I sell it to you for a dollar if you pick it up, but if you ask me to ship it the handling fee will be horrific. LOL. http://www.yumabassman.com/pictures/big%20pulley.jpg "There are no leftists in mainstream American politics. Just two right wing parties, one hard right and one softer." Christopher A. Lee, 8/18/2013 |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
On Tue, 20 Aug 2013 17:48:37 -0700, "Bob La Londe"
wrote: "Gunner Asch" wrote in message news On Tue, 20 Aug 2013 14:00:16 -0500, Karl Townsend wrote: On Tue, 20 Aug 2013 11:02:04 -0700, "Bob La Londe" wrote: "Karl Townsend" wrote in message m... Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. FISHING!? in Yuma as in AZ? Didn't think the fish did well under the catcus. I'm a sucker for fishing anyplace. Wish i had time right now. Got about ten days till the storm (fall harvest) hits. I am counting the days till FL fishing already. This year i have to fish out of a 38' catamaran with twin diesels, 14' beam. I know, its a dirty job, but somebody has to do it. VBG 14' beam on a 38' cat? That sucker will flip over the first whitecaps that show up. He probably doesn't mean a sailing cat. Ah! Thanks! Karl Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl Come on down to Yuma for a day. After we get back from fishing you can take this big ass pulley that's been laying in my back yard for the last 7 or 8 years home with you. It looks like cast iron, so probably not weldable, but you could certainly bolt it to a weldable hub. I didn't measure it, but it looks to be a bout 24". I sell it to you for a dollar if you pick it up, but if you ask me to ship it the handling fee will be horrific. LOL. http://www.yumabassman.com/pictures/big%20pulley.jpg "There are no leftists in mainstream American politics. Just two right wing parties, one hard right and one softer." Christopher A. Lee, 8/18/2013 "There are no leftists in mainstream American politics. Just two right wing parties, one hard right and one softer." Christopher A. Lee, 8/18/2013 |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
He probably doesn't mean a sailing cat. Ah! Thanks! Its a Bertram, kind of like this one: http://www.boattrader.com/listing/19...ortfish-365296 Except its a CAT and has two diesels. Custom fishing boat, less cruise amenities than the one above. Karl |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
On Tue, 20 Aug 2013 21:33:54 -0500, Karl Townsend
wrote: He probably doesn't mean a sailing cat. Ah! Thanks! Its a Bertram, kind of like this one: http://www.boattrader.com/listing/19...ortfish-365296 Except its a CAT and has two diesels. Custom fishing boat, less cruise amenities than the one above. Karl But the link says its a Deep V!! "There are no leftists in mainstream American politics. Just two right wing parties, one hard right and one softer." Christopher A. Lee, 8/18/2013 |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
Its a Bertram, kind of like this one: http://www.boattrader.com/listing/19...ortfish-365296 Except its a CAT and has two diesels. Custom fishing boat, less cruise amenities than the one above. Karl But the link says its a Deep V!! Yep, didn't find a link for a Bertram CAT in 38'. They quit making them in 1990 Karl |
#17
Posted to rec.crafts.metalworking
|
|||
|
|||
weldable pulley and hub
On Tue, 20 Aug 2013 05:36:27 -0500, Karl Townsend
wrote: Milady went on a shop trip yesterday. On the list was get the biggest damn pulley you can find. The local Fleet Farm has a display of pulleys you can weld to hubs. It was all picked over, she didn't do well. Anyone know of an on line source for a really big pulley? Need one inch shaft but I do know a machinist that can change that. Mcmaster Carr has an 18" for $173 but I hope to do better than that. Karl Surplus Center, 18.75", 16# https://www.surpluscenter.com/item.a...190-J&catname= |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Weldable, ductile, and machinable Al? | Metalworking | |||
Are NMTB toolholders weldable | Metalworking | |||
Aluminum - Strong, weldable, bendable - rod | Metalworking | |||
Pulley blocks | UK diy | |||
Pulley blocks | UK diy |