 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Hi, I need to find countersunk 9/16 UNC bolts
I need to source 90 of 9/16 UNC flush headed countersunk bolts/screws
overall length 2" and 10 of the same but overall length 2.5" It doesn't matter what type of drive they have and preferrably threaded the whole way, I could live with 1/2" unthreaded shank. Any more than that I guess would be acceptable, just a lot of thread cutting for me to do.... Anybody help, I have run out of ideas... -- posted from http://www.polytechforum.com/metalwo...ts-579135-.htm using PolytechForum's Web, RSS and Social Media Interface to rec.crafts.metalworking and other engineering groups |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Countersunk nuts? (like a countersunk screw, but a nut) | Metalworking | |||
| swap me YOUR 12 x 1.25 metric bolts, I got tons of *NEW* grade 5USA 1/2 x 1 inch NC bolts | Metalworking | |||
| Fixing Countersunk Siding Nails | Home Repair | |||
| Fixing a countersunk blunder | Woodworking | |||
| countersunk screw definition | UK diy | |||
Threaded Mode
