On Saturday, July 15, 2006 7:07:29 AM UTC+5, Ignoramus19864 wrote:
Are grade 8 bolts drillable? I just realized that bolts that I bought
from McMaster this afternoon for making fittings are grade 8, high
strength, and am a little worried that perhaps they are going to be
difficult to drill (lengthwise).

“Shanghai Pan China Fastening Systems Co., Ltd” . (ISO Certified 9001-2008). We are specialized in producing 1/8”-4” rolled carbon steel pipe Nipples which are widely used in chemical, gas, petrochemical, ship building and fire control industry throughout the world.
Our nipples will benefits your customers as follows:

1. Easy & much convenient tightening increases over 50% efficiency up in installation because of less friction of the rolled thread and 50% - 70% less sealant.
2. No re-call work anymore because of the perfect thread profile being always excellent connection with the fittings.
3. At least 15 times longer life than traditional cutting nipples because of stronger mechanical property and much higher rust-resistance.
4. Zero maintenance on the rolled thread connection pipe system.

I have attached our Product Range Image & Catalogs.

Standard: ASTM, ANSI, ASME, DIN, JIS, BS, GB, EN, UNI

If you are interested we can send you samples of our products

We are supplying our products in U.S.A, if you are interested to be our distributor let me know

“Quality means doing it right when no one is looking” by Henry Ford.

Waiting for your positive reply.

For further Information Company Profile:-
http://www.tradekey.com/company/Pan-...d-1172905.html
Web DHS
http://www.rolledpipenipples.com/
Product Showcase
http://www.tradekey.com/company/Pan-...d-1172905.html

Thank-you.
Regard,
Sibtain Taqi
Telephone: +92-21-111-111-539 Ext:-943
Skype: - sibtain.taqi
Fax: 0086-21-61462118