Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Kitagawa chuck
So an on topic post!
I had a bunch of run out issues with my Hyundai HIT-18 lathe. Bought a brand new Kitagawa chuck and all is well. SO....what do I do with the old one? save it for rough "meatball" jobs?, scrap it?, sell it on eBay for $100.00, Looks to have been greased once or twice in its 15 year life. Holds good, just no repeatability. If you are using oversize stock and turning all diameters all is good. Just problems if you are trying to cut concentric with the OD of your stock. Remove 333 to reply. Randy |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replace DeWalt chuck with quick-change chuck? | Home Repair | |||
Dangerous chuck mounting? 12" South Bend chuck | Metalworking | |||
Should I get a 3 jaw chuck or a 4 jaw chuck for my dividing head? | Metalworking | |||
Bison 5C collet chuck vs. Kalamazoo 1CC collet chuck vs. drawtube/ collet closer | Metalworking | |||
Drill Chuck / Lathe Chuck - Drill Press Question | Metalworking |