Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Is there a formula for calculating springback on mandrel bending 3003?
We are building a mandrel to bend a 3" rad(6" dia.) on a 14" long piece of
1/8" 3003. Problem we are encountering is the amount of springback opens the piece back up to 7 1/4" dia. Even when held in place and heated to relieve tension the part still has more spring than we would have thought. This doesn't happen when we spin it but in this particualr case we need to mandrel bend the part. Any help would be greatly appreciated. We are also planning to bend other rads so trying to build the right diameter mandrel first time is essential. -- +-------------[ SERVER SIGNATURE ]----------+ | posted via http://www.polytechforum.com | | Web, RSS and Social Media Interface to | | rec.crafts.metalworking and other groups | +-------------------------------------------+ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sony PSP 3003 plaything | Electronics Repair | |||
Springback when steam bending? | Woodworking | |||
CNC mandrel bending... where? | Metalworking | |||
predicting springback | Metalworking | |||
Mandrel-bending handle bars | Metalworking |