Aluminum casting wanted
 

responding to
http://www.polytechforum.com/metalwo...ed-301127-.htm
, Donald Eggert wrote:
Leon wrote:

What I am looking for is someone that can sand cast 3 small aluminum
parts about the size and complexity of a cast VW valve cover. I
intend to set up my own small foundry some day but right now I just
don't have the time and if I can find someone to do the casting for a
reasonable cost I'll just have it done. I'm thinking 3 or 4 sets
should get me started. 12 pieces total.

I'll have the patterns finished in a couple of days (I hope) and all
that will be left to do is ram some sand, cut a sprue and poor.......

So if you have a hobby scale casting set up and want a bit of income
producing work or just know of a foundry that does small jobs like
this for a reasonable fee please E-mail me and let me know.

We can cast parts in aluminum up to 100 lbs. Santiam Bronze Works look it up
on google. we are looking for some repeat customers. Phone 541-401-4916. or
. www.santiambronzeworks.com

Aluminum casting wanted
 

On Tue, 13 Nov 2012 17:18:02 +0000, Donald Eggert wrote:

responding to
http://www.polytechforum.com/metalwo...minum-casting-
wanted-301127-.htm
, Donald Eggert wrote:
Leon wrote:

What I am looking for is someone that can sand cast 3 small aluminum
parts about the size and complexity of a cast VW valve cover. I intend
to set up my own small foundry some day but right now I just don't have
the time and if I can find someone to do the casting for a reasonable
cost I'll just have it done. I'm thinking 3 or 4 sets should get me
started. 12 pieces total.

I'll have the patterns finished in a couple of days (I hope) and all
that will be left to do is ram some sand, cut a sprue and poor.......

So if you have a hobby scale casting set up and want a bit of income
producing work or just know of a foundry that does small jobs like this
for a reasonable fee please E-mail me and let me know.

We can cast parts in aluminum up to 100 lbs. Santiam Bronze Works look
it up on google. we are looking for some repeat customers. Phone
541-401-4916. or . www.santiambronzeworks.com

I got a "server not found" error when I tried your web address.

--
Tim Wescott
Control system and signal processing consulting
www.wescottdesign.com

Aluminum casting wanted
 

On 11/13/2012 10:17 AM, Tim Wescott wrote:
On Tue, 13 Nov 2012 17:18:02 +0000, Donald Eggert wrote:

responding to
http://www.polytechforum.com/metalwo...minum-casting-
wanted-301127-.htm
, Donald Eggert wrote:
Leon wrote:

What I am looking for is someone that can sand cast 3 small aluminum
parts about the size and complexity of a cast VW valve cover. I intend
to set up my own small foundry some day but right now I just don't have
the time and if I can find someone to do the casting for a reasonable
cost I'll just have it done. I'm thinking 3 or 4 sets should get me
started. 12 pieces total.

I'll have the patterns finished in a couple of days (I hope) and all
that will be left to do is ram some sand, cut a sprue and poor.......

So if you have a hobby scale casting set up and want a bit of income
producing work or just know of a foundry that does small jobs like this
for a reasonable fee please E-mail me and let me know.

We can cast parts in aluminum up to 100 lbs. Santiam Bronze Works look
it up on google. we are looking for some repeat customers. Phone
541-401-4916. or . www.santiambronzeworks.com

I got a "server not found" error when I tried your web address.

Same here. It exists, but is locked for unknown reasons. I didn't know
there was anyplace like that around here.

Paul

Aluminum casting wanted
 

On Tue, 13 Nov 2012 10:36:55 -0800, Paul Drahn wrote:

On 11/13/2012 10:17 AM, Tim Wescott wrote:
On Tue, 13 Nov 2012 17:18:02 +0000, Donald Eggert wrote:

responding to
http://www.polytechforum.com/metalwo...minum-casting-
wanted-301127-.htm
, Donald Eggert wrote:
Leon wrote:

What I am looking for is someone that can sand cast 3 small aluminum
parts about the size and complexity of a cast VW valve cover. I
intend to set up my own small foundry some day but right now I just
don't have the time and if I can find someone to do the casting for a
reasonable cost I'll just have it done. I'm thinking 3 or 4 sets
should get me started. 12 pieces total.

I'll have the patterns finished in a couple of days (I hope) and all
that will be left to do is ram some sand, cut a sprue and poor.......

So if you have a hobby scale casting set up and want a bit of income
producing work or just know of a foundry that does small jobs like
this for a reasonable fee please E-mail me and let me know.

We can cast parts in aluminum up to 100 lbs. Santiam Bronze Works look
it up on google. we are looking for some repeat customers. Phone
541-401-4916. or . www.santiambronzeworks.com

I got a "server not found" error when I tried your web address.

Same here. It exists, but is locked for unknown reasons. I didn't know
there was anyplace like that around here.

There's one in Boring, OR, too. AFAIK it's more industrialish, but then,
I know of them through a customer that has them make castings for antique
car parts.

--
Tim Wescott
Control system and signal processing consulting
www.wescottdesign.com