looking for stainless rod in small diameters..
 

Non- magnetic, although actual grade is not important-- sizes are to be 1/16, 5/64, 3/32 and 1/8..

Prices have gone through the roof at my usual supplier...looking for alternate vendors, appreciate any suggestions.

Thx

--

looking for stainless rod in small diameters..
 

http://www.onlinemetals.com/merchant...ep=2&top_cat=1

--

"PrecisionmachinisT" 123machinist notmail.com wrote:

Non- magnetic, although actual grade is not important-- sizes
are to be 1/16, 5/64, 3/32 and 1/8..

Prices have gone through the roof at my usual supplier...looking
for alternate vendors, appreciate any suggestions.

Thx

--

looking for stainless rod in small diameters..
 

On Friday, November 2, 2012 1:12:54 PM UTC-7, PrecisionmachinisT wrote:
Non- magnetic, although actual grade is not important-- sizes are to be 1/16, 5/64, 3/32 and 1/8.. Prices have gone through the roof at my usual supplier...looking for alternate vendors, appreciate any suggestions. Thx --

Needed a 1/16 ss rod for a project. Ended up using a TIG weleding rod

Good luck

looking for stainless rod in small diameters..
 

"John Doe" wrote in message ...
http://www.onlinemetals.com/merchant...ep=2&top_cat=1



Thanks but the smallest size they have is 3/32


"PrecisionmachinisT" 123machinist notmail.com wrote:

Non- magnetic, although actual grade is not important-- sizes
are to be 1/16, 5/64, 3/32 and 1/8..

Prices have gone through the roof at my usual supplier...looking
for alternate vendors, appreciate any suggestions.

Thx

--

looking for stainless rod in small diameters..
 

In article ,
"PrecisionmachinisT" wrote:

"John Doe" wrote in message
...
http://www.onlinemetals.com/merchant...ep=2&top_cat=1



Thanks but the smallest size they have is 3/32


"PrecisionmachinisT" 123machinist notmail.com wrote:

Non- magnetic, although actual grade is not important-- sizes
are to be 1/16, 5/64, 3/32 and 1/8..

Prices have gone through the roof at my usual supplier...looking
for alternate vendors, appreciate any suggestions.


McMaster has six foot lengths of 303 in:

1/16 @ $10.8 (precision ground)

3/32 @ $2.90 (mill) & $11.86 (PG)

1/8 @ $3.85 (mill) & $14.99 (pG)

No 5/64. You can pick from 0.075 or 0.080" wire, though. May be worth
looking at the other sizes you want "as wire" as well.

Small Parts (AKA Amazon since they bought them out) is far more
expensive.

--
Cats, coffee, chocolate...vices to live by
Please don't feed the trolls. Killfile and ignore them so they will go away.

looking for stainless rod in small diameters..
 

"PrecisionmachinisT" 123machinist notmail.com wrote:

"John Doe" jdoe usenetlove.invalid wrote

http://www.onlinemetals.com/merchant...ep=2&top_cat=1

Thanks but the smallest size they have is 3/32

that should work for your 3/32 and 1/8 sizes...

--










"PrecisionmachinisT" 123machinist notmail.com wrote:

Non- magnetic, although actual grade is not important-- sizes
are to be 1/16, 5/64, 3/32 and 1/8..

Prices have gone through the roof at my usual supplier...looking
for alternate vendors, appreciate any suggestions.

Thx

--




Path: eternal-september.org!mx04.eternal-september.org!feeder.eternal-september.org!news.glorb.com!border3.nntp.dca.giga news.com!Xl.tags.giganews.com!border1.nntp.dca.gig anews.com!nntp.giganews.com!local2.nntp.dca.gigane ws.com!nntp.scnresearch.com!news.scnresearch.com.P OSTED!not-for-mail
NNTP-Posting-Date: Fri, 02 Nov 2012 17:32:13 -0500
From: "PrecisionmachinisT" 123machinist notmail.com
Newsgroups: rec.crafts.metalworking
References: J5-dnSlbxpXYtAnNnZ2dnUVZ_uKdnZ2d scnresearch.com k719sf$st$1 dont-email.me
Subject: looking for stainless rod in small diameters..
Date: Fri, 2 Nov 2012 15:32:07 -0700
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.5931
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.6090
Message-ID: R7idnbpTcqtw1AnNnZ2dnUVZ_jednZ2d scnresearch.com
Lines: 23
X-Usenet-Provider: http://www.giganews.com
NNTP-Posting-Host: 216.128.96.15
X-AuthenticatedUsername: NoAuthUser
X-Trace: sv3-D2eVUa7bDn61n6GdtsYLA84MG5oJFWNrOVn9eWTdJUja30aP2V l5c4ZB915eKgpcZpvoavwCCNkhdIP!h0crFiguFTaiiBS2nsLq 249BbSqogPCAYQXb+qTdieFHdVRaRzVOhaO88y7qGwi2sYNLIC OaeQXq!6u95Q47KnawKyOkWqfBNp3Q=
X-Complaints-To: abuse scnresearch.com
X-DMCA-Complaints-To: abuse scnresearch.com
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
X-Original-Bytes: 1950
Xref: mx04.eternal-september.org rec.crafts.metalworking:308249

looking for stainless rod in small diameters..
 

"John Doe" wrote in message
...
"PrecisionmachinisT" 123machinist notmail.com wrote:

"John Doe" jdoe usenetlove.invalid wrote

http://www.onlinemetals.com/merchant...ep=2&top_cat=1

Thanks but the smallest size they have is 3/32

that should work for your 3/32 and 1/8 sizes...


I might have to just buy all of it in 1/8 and turn it down in the swiss--I
need 4in lengths but as it standsm the max turning length in my screw
machines is 3.94 but maybe i could tweak a linit switch or something and
cheat.

looking for stainless rod in small diameters..
 

On 11/2/2012 4:12 PM, PrecisionmachinisT wrote:
Non- magnetic, although actual grade is not important-- sizes are to be 1/16, 5/64, 3/32 and 1/8..

Prices have gone through the roof at my usual supplier...looking for alternate vendors, appreciate any suggestions.

Thx


http://www.loosco.com/index.php?page...-wire#products

look at "retaining wire"

looking for stainless rod in small diameters..
 

On 11/2/2012 4:12 PM, PrecisionmachinisT wrote:
Non- magnetic, although actual grade is not important-- sizes are to be 1/16, 5/64, 3/32 and 1/8..

Prices have gone through the roof at my usual supplier...looking for alternate vendors, appreciate any suggestions.

Thx


http://www.ksmetals.com/


1/16 http://www.hobbylinc.com/htm/k+s/k+s7131.htm

3/32 http://www.hobbylinc.com/htm/k+s/k+s7133.htm

1/8 http://www.hobbylinc.com/htm/k+s/k+s7135.htm


http://www.hobbylinc.com/hobby_and_c...and_metal_rods

--
Steve W.

looking for stainless rod in small diameters..
 

On Fri, 2 Nov 2012 13:12:48 -0700
"PrecisionmachinisT" wrote:

Non- magnetic, although actual grade is not important-- sizes are to be 1/16, 5/64, 3/32 and 1/8..

Prices have gone through the roof at my usual supplier...looking for alternate vendors, appreciate any suggestions.

Thx


Would stainless MIG wire work?

--
Leon Fisk
Grand Rapids MI/Zone 5b
Remove no.spam for email

looking for stainless rod in small diameters..
 

"Leon Fisk" wrote in message ...
On Fri, 2 Nov 2012 13:12:48 -0700
"PrecisionmachinisT" wrote:

Non- magnetic, although actual grade is not important-- sizes are to be 1/16, 5/64, 3/32 and 1/8..

Prices have gone through the roof at my usual supplier...looking for alternate vendors, appreciate any suggestions.

Thx


Would stainless MIG wire work?


Yes but it is cost-prohibitive.