Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
horizontal mill bearing
My supermax mill has both a vertical and a horizontal spindle.
Unfortunately the outboard spindle support for the horizontal spindle is MIA. I want to make one. I can pretty well figure how to machine a hunk of steel for the support (wish i had a hunk of grey iron) What should I use for a bearing? Are these just a bronze or brass bushing? I think a timkem and race and housing is too large a diameter, it must be smaller than my cutters. Karl |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Craigs Horizontal Mill | Metalworking | |||
Centec Horizontal Mill? | Metalworking | |||
Horizontal mill: regular arbor cutters or end mill adapter? | Metalworking | |||
Blade Bearing Guides for Horizontal Band Saw | Metalworking |