Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
OW
On May 19, 6:05*pm, Karl Townsend
wrote: I was using the radial arm drill this afternoon to drill a couple 3/4 holes in 1/2 inch plate. I needed to copy the hole spacing on a part I'd ruined so I clamped it to the plate with a couple vice grips. Then in the drill vice and drill the hole in one shot. The drill grabbed right when busting through and the part pulled right out of the vice and turned into a helicopter. I'm glad the vice was as high as it was, I just got a nasty bruise on my belly. If it had been a few inches lower, I'd be a soprano right now. Karl Karl Occasionally my drill press reminds me that severing body parts is best done by qualified medical professionals. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|