House booster pump as coolant pump??
Maybe you haven't read the reviews.. numerous buyers have returned up to 3
defective units within days or weeks. One buyer claims it works well as a transfer pump for oil. Another user explains that there is no design feature for preventing the (plastic) pump case pressure from reaching 140 psi.. so essentially designed to fail. I would think that a centrifugal impeller could deliver more than adequate flow for (clean) machine coolant.. just my guess though. For more flow, use a larger impeller (bigger unit) or faster RPM, IMO. -- WB .......... "Existential Angst" wrote in message ... Such as: http://www.harborfreight.com/34-hors...ing-68390.html A 3/4 hp Graymills coolant pump, typical in cnc, is almost $500, and puts out 30-35 psi. The HF pump, judging from the total headlift, might be as much as 150 psi (zero flow), and proly 60-90 psi, thru a cupla loclines. I have a few machines that I would like to amp up the coolant psi. I would run separate lines from this pump to the various machines, separate from the existing centrifugal pumps.. The max flow is 1100 gph, or about 20 gal/min, which is certainly less than a 3/4 graymills puts out, but enough for a few loclines, I would think The HF pump is on sale at $120, so at least psi-wise, would be a good deal -- IF it can handle soluble oil. I would imagine I'd have to filter/strain the coolant pretty well, unless the pump mechanism is forgiving. Opinions? -- EA |
House booster pump as coolant pump??
"Wild_Bill" wrote in message
... Maybe you haven't read the reviews.. numerous buyers have returned up to 3 defective units within days or weeks. One buyer claims it works well as a transfer pump for oil. Yeah, after he had to modify it!! Another user explains that there is no design feature for preventing the (plastic) pump case pressure from reaching 140 psi.. so essentially designed to fail. Yeah, I was having trouble getting to the reviews, now I got'em. Goodgawd.... Altho one guy sez there is a simple fix to one problem, altho the details are not clear. 140 psi in the plumbing can be more than a problem!! Gotta give HF credit for letting 14 one-star reviews stay up, tho.... LOL I would think that a centrifugal impeller could deliver more than adequate flow for (clean) machine coolant.. just my guess though. For more flow, use a larger impeller (bigger unit) or faster RPM, IMO. Oh yeah, the flow is great with Graymills pumps, but I'm more concerned with psi. The poor pressure regulation of the HF unit wouldn't be an issue, either -- if it would just run and not explode! I wonder if this unit would function a little better in my environment, where it will never operate in zero flow/max pres. situations. Appreciate the heads up, tho. If I do take a chance on this thing, I'll know to install it right away, instead of letting it lay around for months, like I usually do. :) -- EA -- WB ......... "Existential Angst" wrote in message ... Such as: http://www.harborfreight.com/34-hors...ing-68390.html A 3/4 hp Graymills coolant pump, typical in cnc, is almost $500, and puts out 30-35 psi. The HF pump, judging from the total headlift, might be as much as 150 psi (zero flow), and proly 60-90 psi, thru a cupla loclines. I have a few machines that I would like to amp up the coolant psi. I would run separate lines from this pump to the various machines, separate from the existing centrifugal pumps.. The max flow is 1100 gph, or about 20 gal/min, which is certainly less than a 3/4 graymills puts out, but enough for a few loclines, I would think The HF pump is on sale at $120, so at least psi-wise, would be a good deal -- IF it can handle soluble oil. I would imagine I'd have to filter/strain the coolant pretty well, unless the pump mechanism is forgiving. Opinions? -- EA |
All times are GMT +1. The time now is 01:24 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter