Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
160 pound spring for a 1/2 inch gap?
On Mon, 19 Mar 2012 21:57:07 -0400, "Mike Marlow"
wrote: Lloyd E. Sponenburgh wrote: John Doe fired this volley in news:4f67b801$0$860 : I want to put a spring under the heel of my inline skate. But there is only a 1/2 inch clearance, and it needs to be a heavy-duty spring. Should I consider using a spring steel flat bar or similar, instead? Belville washers. You can stack them to any height you wish, and get them in anything from mere foil to structural thicknesses. LLoyd You guys seem to have an interesting conversation going on, but why are you cross posting it to all of the irrelevant groups? Sorry, Mike. I'm running Agent 4.2 and I'm not sure how to strip out other newsgroups in a reply. It appears, when I show all of the fields, that my replies go only to rec.crafts.metalworking. But I don't know. Can anyone give me a hint? -- Ed Huntress |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
160 pound spring for a 1/2 inch gap? | Woodworking | |||
160 pound spring for a 1/2 inch gap? | Home Repair | |||
160 pound spring for a 1/2 inch gap? | Metalworking | |||
Spitzlift, a portable 33 pound crane with a 700 pound capacity | Home Repair | |||
Spitzlift, a portable 33 pound crane with a 700 pound capacity | UK diy |