Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Pockets in AL plate
I have to mill 32 round pockets into an AL plate. The pockets range from
2.125" dia. x .180" deep to 2.625" dia. x 1.80 deep. This plate will be a mold for injecting Urethane into thin wire wheel brushes that are used to clean grooves and such. This encapsulating process is done by another company that is a trading partner and good friends. They just don't have much machining capability. In return, I get a hot stamping machine that I have good use for. Very much like this: http://atdtools.com/8245 My first thought is to use a large end mill and do the center of the pocket then enlarge the dia. with a boring head. Any other ideas? |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Pockets in AL plate
Tom Gardner wrote: I have to mill 32 round pockets into an AL plate. The pockets range from 2.125" dia. x .180" deep to 2.625" dia. x 1.80 deep. This plate will be a mold for injecting Urethane into thin wire wheel brushes that are used to clean grooves and such. This encapsulating process is done by another company that is a trading partner and good friends. They just don't have much machining capability. In return, I get a hot stamping machine that I have good use for. Very much like this: http://atdtools.com/8245 My first thought is to use a large end mill and do the center of the pocket then enlarge the dia. with a boring head. Any other ideas? If you don't have CNC capability, I think you're on the right track. I would mark the full dia and rough it out with the large end mill (not just the center) so that you minimize the passes with the boring head to final dia. With a CNC the circular interpolation would to it all in one setup with no fuss. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Pockets in AL plate
"Pete C." wrote in message . com... If you don't have CNC capability, I think you're on the right track. I would mark the full dia and rough it out with the large end mill (not just the center) so that you minimize the passes with the boring head to final dia. With a CNC the circular interpolation would to it all in one setup with no fuss. __________________________________________________ ____________ Yep, this is one of the few times I really crave CNC on my BP! If I could only justify it.... |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Pockets in AL plate
"Tom Gardner" wrote in message ... I have to mill 32 round pockets into an AL plate. The pockets range from 2.125" dia. x .180" deep to 2.625" dia. x 1.80 deep. This plate will be a mold for injecting Urethane into thin wire wheel brushes that are used to clean grooves and such. This encapsulating process is done by another company that is a trading partner and good friends. They just don't have much machining capability. In return, I get a hot stamping machine that I have good use for. Very much like this: http://atdtools.com/8245 My first thought is to use a large end mill and do the center of the pocket then enlarge the dia. with a boring head. Any other ideas? If I had to make it on my manual machines, I'd subdivide the plate into pieces I could bore out on a lathe faceplate, to get a better surface finish than milling, and bolt them to a subplate. I'd make some spares as replacements or to change the size mix. jsw |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Pockets in AL plate
On 3/15/2012 9:39 AM, Jim Wilkins wrote:
"Tom wrote in message ... I have to mill 32 round pockets into an AL plate. The pockets range from 2.125" dia. x .180" deep to 2.625" dia. x 1.80 deep. This plate will be a mold for injecting Urethane into thin wire wheel brushes that are used to clean grooves and such. This encapsulating process is done by another company that is a trading partner and good friends. They just don't have much machining capability. In return, I get a hot stamping machine that I have good use for. Very much like this: http://atdtools.com/8245 My first thought is to use a large end mill and do the center of the pocket then enlarge the dia. with a boring head. Any other ideas? If I had to make it on my manual machines, I'd subdivide the plate into pieces I could bore out on a lathe faceplate, to get a better surface finish than milling, and bolt them to a subplate. I'd make some spares as replacements or to change the size mix. jsw Interesting concept. I see the pockets are .180 deep. Wonder if the largest pocket has an error on the depth? 1.80 deep? If they are ALL ..180 deep, then you could bore the hole completely through and then reduce the rim to .180. Paul |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Pockets in AL plate
"Jim Wilkins" wrote in message ... "Tom Gardner" wrote in message ... I have to mill 32 round pockets into an AL plate. The pockets range from 2.125" dia. x .180" deep to 2.625" dia. x 1.80 deep. This plate will be a mold for injecting Urethane into thin wire wheel brushes that are used to clean grooves and such. This encapsulating process is done by another company that is a trading partner and good friends. They just don't have much machining capability. In return, I get a hot stamping machine that I have good use for. Very much like this: http://atdtools.com/8245 My first thought is to use a large end mill and do the center of the pocket then enlarge the dia. with a boring head. Any other ideas? If I had to make it on my manual machines, I'd subdivide the plate into pieces I could bore out on a lathe faceplate, to get a better surface finish than milling, and bolt them to a subplate. I'd make some spares as replacements or to change the size mix. jsw __________________________________________________ _ That would be nice but the owner said no. |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Pockets in AL plate
If the depths are all 0.180" then I see if 0.187" is ok, then do them as
through holes in a sheet of 3/16" plate, then bolt that to a backing plate. Saves all the agony of a good surface finish on the bottom of each pocket. Otherwise without cnc I think your approach is probably best. ----- Regards, Carl Ijames "Tom Gardner" wrote in message ... I have to mill 32 round pockets into an AL plate. The pockets range from 2.125" dia. x .180" deep to 2.625" dia. x 1.80 deep. This plate will be a mold for injecting Urethane into thin wire wheel brushes that are used to clean grooves and such. This encapsulating process is done by another company that is a trading partner and good friends. They just don't have much machining capability. In return, I get a hot stamping machine that I have good use for. Very much like this: http://atdtools.com/8245 My first thought is to use a large end mill and do the center of the pocket then enlarge the dia. with a boring head. Any other ideas? |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Pockets in AL plate
Tom asked:
My first thought is to use a large end mill and do the center of the pocket then enlarge the dia. with a boring head. Any other ideas? Use as large an end mill as will fit in the hole with sufficient roughing clearance. Spiral-drill the holes in conventional milling (spiral drill gives a better finish in conventional than it does in climb). Then do a full-depth finishing pass in climb. You can save tool life and a bit of time (by virtue of faster feed rates) if you pre-drill the hole as large and deep as permissible. Lloyd |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|