Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
u-channel wanted -- small quantity
I want ptototype quantities of a 1" x 1/2" x 1/8" hot rolled u-
channel. One piece of any length is enough but I'm willing to meet a $50 minimum. The two local places I emailed (New York City) aren't getting back to me. I either want reasonable shipping costs (about $10), or to pick it up myself and for them to cut it, or I want place for me to lay it down and make two cuts with a hack saw (a parking lot or sidewalk where I could get away with it is fine). I haven't had much luck finding reasonable prices on the internet. Either the shipping cost is over $100 or it's about $10 but the stock is overpriced. Any suggestions? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Need sorce for Beryllium-copper sheet or strip, small quantity | Electronics Repair | |||
Tile grout in small quantity | Home Repair | |||
Cheapest mail order for small quantity of screw | UK diy | |||
Drain Channel Cover wanted | UK diy |